my Honda Accord 9th Generation (2013-2017) transmission is jerking what causes this

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

572 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms and solutions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission pan to avoid burns.

Symptoms

•Jerking or shuddering during acceleration
•Delayed or rough shifting between gears
•Unusual noises during gear changes
•Check engine light illuminated
•Fluid leaks under the vehicle

Diagnostic Steps

1
Scan the vehicle's OBD-II system for error codes that may indicate transmission faults.
2
Check the transmission fluid level and condition; look for signs of contamination or burning.
3
Inspect the transmission fluid for leaks at the seals and connections.
4
Test the operation of the transmission control module for any faults.
5
Examine the engine mounts and transmission mounts for wear or damage.
6
Check for proper operation of the throttle position sensor and vehicle speed sensor.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Drain pan
•Funnel
•Jack and jack stands

Parts Required

•Transmission fluid (specific type as per manufacturer)
•Transmission filter (if applicable)
•Transmission mounts (if replacement is needed)
•Transmission control module (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for error codes that may indicate transmission faults.
2
Check the transmission fluid level and condition; look for signs of contamination or burning.
3
Inspect the transmission fluid for leaks at the seals and connections.
4
Test the operation of the transmission control module for any faults.
5
Examine the engine mounts and transmission mounts for wear or damage.
6
Check for proper operation of the throttle position sensor and vehicle speed sensor.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface, and engage the parking brake.

2. Check and Replace Transmission Fluid

Locate the Transmission Dipstick: Remove the dipstick and check fluid level.
Inspect Fluid Condition: If the fluid is dark or smells burnt, it needs to be replaced.
Drain Old Fluid:
- Place a drain pan under the transmission pan.
- Remove the transmission pan bolts using a socket wrench.
- Carefully lower the pan to drain the fluid completely.
Replace Filter (if applicable):
- Remove the old filter and replace with a new one.
Add New Fluid:
- Reattach the transmission pan and torque the bolts to manufacturer specifications.
- Use a funnel to add new transmission fluid through the dipstick tube.

3. Inspect and Replace Transmission Mounts

Lift the Vehicle: Use a jack and jack stands to safely elevate the vehicle.
Locate Transmission Mounts: Identify the mounts securing the transmission.
Inspect for Damage: Check for cracks or excessive wear on the mounts.
Replace If Necessary:
- Remove the bolts securing the mount using a socket set.
- Install new mounts and torque to specified values.

4. Reprogram or Replace Transmission Control Module (if needed)

Scan for Codes: Confirm if the transmission control module (TCM) shows any diagnostic trouble codes.
Reprogram TCM: If applicable, follow manufacturer instructions for reprogramming.
Replace TCM: If reprogramming does not resolve the issue, remove the old TCM and install a new one.