my Honda Accord 9th Generation (2013-2017) wipers don't work, what could be the issue?

Honda Accord Eleventh Generation (2023-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

520 words

Problem Statement

Learn how to diagnose and fix wiper issues in Honda Accord 2013-2017. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to prevent shocks.

Symptoms

•Wipers do not operate when activated
•Wiper control stalk feels loose or unresponsive
•No sound or movement from the wiper motor
•Wipers are stuck in one position
•Washer fluid does not spray when activated

Diagnostic Steps

1
Check the wiper fuse in the fuse box for continuity using a multimeter.
2
Inspect the wiper motor connector for any signs of corrosion or loose connections.
3
Test the wiper switch on the steering column for proper function using a multimeter.
4
Verify the operation of the wiper relay by swapping it with a similar relay in the fuse box.
5
Check for any obstructions in the wiper mechanism or linkage.
6
Inspect the wiper motor for physical damage or signs of failure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Fuse puller or pliers
•Electrical contact cleaner
•Socket set

Parts Required

•Wiper fuse (if blown)
•Wiper motor (if faulty)
•Wiper relay (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the wiper fuse in the fuse box for continuity using a multimeter.
2
Inspect the wiper motor connector for any signs of corrosion or loose connections.
3
Test the wiper switch on the steering column for proper function using a multimeter.
4
Verify the operation of the wiper relay by swapping it with a similar relay in the fuse box.
5
Check for any obstructions in the wiper mechanism or linkage.
6
Inspect the wiper motor for physical damage or signs of failure.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the ignition is turned off.
Disconnect the battery to prevent any electrical shorts.

2. Replace Wiper Fuse

Locate the fuse box (usually under the dashboard or in the engine compartment).
Remove the wiper fuse using a fuse puller or pliers.
Inspect the fuse for continuity; replace with a new fuse of the same amperage if blown.

3. Inspect and Clean Wiper Motor Connector

Locate the wiper motor (usually under the cowl).
Disconnect the electrical connector from the wiper motor.
Clean any corrosion on the terminals with electrical contact cleaner.
Reconnect the connector securely.

4. Test and Replace Wiper Motor (if necessary)

Connect a multimeter to the wiper motor terminals while activating the wiper switch.
If no voltage is detected, the motor may need replacement.
To replace, remove the bolts securing the wiper motor, disconnect the linkage, and install the new motor in reverse order.

5. Check Wiper Relay

Locate the wiper relay in the fuse box.
Swap the wiper relay with a similar one from another circuit to test.
If the wipers operate with the swapped relay, replace the faulty relay with a new one.