what to do if my Honda Accord 9th Generation (2013-2017) shakes when braking?

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

572 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking during braking in Honda Accord 9th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported on jack stands before working underneath.
•Allow brakes to cool before handling components to prevent burns.

Symptoms

•Shaking or vibrating sensation felt in the steering wheel or brake pedal when braking
•Uneven wear on brake pads or rotors
•Noise such as grinding or squeaking when braking
•Pulling to one side while braking
•Increased stopping distance

Diagnostic Steps

1
Inspect brake rotors for warping or damage using a run-out gauge.
2
Check brake pad thickness and condition for uneven wear or damage.
3
Examine suspension components including control arms, bushings, and tie rods for wear or damage.
4
Verify tire condition and balance to ensure they are evenly worn and properly inflated.
5
Test brake fluid level and condition for contamination or moisture.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack
•Jack stands
•Caliper tool
•Torque wrench
•Run-out gauge
•Socket set

Parts Required

•Brake pads
•Brake rotors
•Brake fluid (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or damage using a run-out gauge.
2
Check brake pad thickness and condition for uneven wear or damage.
3
Examine suspension components including control arms, bushings, and tie rods for wear or damage.
4
Verify tire condition and balance to ensure they are evenly worn and properly inflated.
5
Test brake fluid level and condition for contamination or moisture.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Wear safety gloves and goggles.

2. Remove Wheel

Sub-steps:
1. Loosen the lug nuts slightly while the vehicle is still on the ground.
2. Use a jack to lift the vehicle and secure it with jack stands.
3. Remove the lug nuts fully and take off the wheel.
Tools Required: Lug wrench, jack, jack stands.

3. Inspect Brake Components

Sub-steps:
1. Remove the brake caliper by loosening the caliper bolts and sliding it off the rotor.
2. Check the brake pads for thickness; replace if less than 3 mm.
3. Inspect the rotors for warping using a run-out gauge; replace if the run-out exceeds manufacturer specifications.
4. Check for any scoring or deep grooves on the rotor surface.
Tools Required: Caliper tool, torque wrench, run-out gauge.
Safety Warnings: Ensure the brake system is not under pressure before removing the caliper.

4. Replace Components as Necessary

Sub-steps:
1. If rotors are warped, remove the old rotors and install new ones, ensuring they are torqued to the manufacturer's specifications.
2. Replace worn brake pads with new ones, ensuring they are properly seated.
3. Reinstall the caliper and torque the caliper bolts to specified values.
Tools Required: Torque wrench, socket set.

5. Reassemble and Test

Sub-steps:
1. Reattach the wheel and hand-tighten the lug nuts.
2. Lower the vehicle from the jack stands and tighten the lug nuts to the specified torque value.
3. Pump the brake pedal several times to ensure brake pads seat correctly.
Tools Required: Torque wrench, jack, jack stands.