why does my Honda Accord 9th Generation (2013-2017) AC blow hot air

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

599 words

Problem Statement

Learn how to diagnose and fix AC blowing hot air in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

HVAC

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Ensure the engine is cool before servicing the AC system to avoid burns.

Symptoms

•AC compressor not engaging
•Weak airflow from vents
•Warm air blowing from vents, regardless of temperature setting
•Unusual noises from the AC system (e.g., hissing or clicking)
•AC warning light illuminated on the dashboard (if applicable)

Diagnostic Steps

1
Check the AC system's refrigerant level using a manifold gauge set to ensure it is within specifications.
2
Inspect the AC compressor for engagement when the AC is activated (look for the clutch to engage).
3
Examine the AC fuses and relays in the fuse box for any blown fuses or faulty relays.
4
Scan the vehicle’s onboard computer with an OBD-II scanner for any error codes related to the AC system.
5
Inspect the cabin air filter for blockages that could restrict airflow.
6
Check for any visible leaks in the AC system, including hoses and connections.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Manifold gauge set
•OBD-II scanner
•Multimeter
•Socket set
•Safety glasses

Parts Required

•AC refrigerant (R-134a)
•AC compressor (if faulty)
•Cabin air filter (if clogged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the AC system's refrigerant level using a manifold gauge set to ensure it is within specifications.
2
Inspect the AC compressor for engagement when the AC is activated (look for the clutch to engage).
3
Examine the AC fuses and relays in the fuse box for any blown fuses or faulty relays.
4
Scan the vehicle’s onboard computer with an OBD-II scanner for any error codes related to the AC system.
5
Inspect the cabin air filter for blockages that could restrict airflow.
6
Check for any visible leaks in the AC system, including hoses and connections.

Solution

1. Preparation

Gather tools: manifold gauge set, OBD-II scanner, multimeter, socket set, and safety glasses.
Ensure the vehicle is parked on a level surface with the engine off.
Disconnect the negative battery terminal to ensure safety.

2. Check and Recharge Refrigerant

Sub-step 1: Connect the manifold gauge set to the low and high-pressure service ports.
Sub-step 2: Start the engine and turn on the AC to the maximum setting.
Sub-step 3: Observe the pressure readings. If low, proceed to recharge the system with the correct type of refrigerant (typically R-134a).
Sub-step 4: Add refrigerant slowly until the correct pressure is achieved according to the vehicle specifications.

3. Inspect and Replace AC Components

Sub-step 1: If the compressor does not engage, use a multimeter to test the electrical connections to the compressor for power and ground.
Sub-step 2: If there’s no power, check the AC fuses and relays; replace any that are faulty.
Sub-step 3: If the compressor is faulty, remove it using a socket set, and replace it with a new unit, ensuring proper alignment and connection.
Sub-step 4: Replace the cabin air filter if clogged; access it through the glove box for replacement.

4. Perform System Leak Test

Sub-step 1: Use a UV dye in the refrigerant to detect leaks; run the system for a few minutes and inspect all connections and components for dye traces.
Sub-step 2: Repair any leaks found and recharge the system if necessary.

5. Final Checks

Sub-step 1: Reconnect the battery terminal.
Sub-step 2: Start the engine and test the AC system for proper operation.