why does my Honda Accord 9th Generation (2013-2017) engine shake when I accelerate?

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

552 words

Problem Statement

Learn how to diagnose and fix engine shaking during acceleration in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms and solutions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before opening any components.

Symptoms

•Engine vibrations increase with acceleration
•Possible misfiring detected
•Unusual noises from the engine (e.g., knocking or pinging)
•Rough idle when stationary
•Decreased fuel efficiency
•Check engine light illuminated

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any fault codes.
2
Inspect engine mounts for signs of wear or damage.
3
Check for vacuum leaks around intake manifold or hoses.
4
Examine spark plugs for wear or fouling.
5
Test ignition coils for proper function.
6
Ensure the fuel delivery system is functioning correctly by checking fuel pressure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Spark plug socket
•Torque wrench
•Multimeter
•Fuel pressure gauge

Parts Required

•Engine mounts (if damaged)
•Spark plugs
•Ignition coils (if faulty)
•Fuel filter
•Fuel injectors (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any fault codes.
2
Inspect engine mounts for signs of wear or damage.
3
Check for vacuum leaks around intake manifold or hoses.
4
Examine spark plugs for wear or fouling.
5
Test ignition coils for proper function.
6
Ensure the fuel delivery system is functioning correctly by checking fuel pressure.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to ensure safety.
Allow the engine to cool down before beginning work.

2. Inspect Engine Mounts

Sub-steps:
1. Use a socket set to remove the bolts securing the engine mounts.
2. Visually inspect the mounts for cracks, tears, or excessive wear.
3. Replace any damaged mounts with OEM parts.
Tools Required: Socket set, wrench set
Safety Warnings: Ensure the vehicle is securely lifted and supported if required.

3. Replace Spark Plugs

Sub-steps:
1. Remove the ignition coils by unbolting them and disconnecting the electrical connectors.
2. Use a spark plug socket to remove old spark plugs.
3. Inspect and replace with new spark plugs according to specifications (typically NGK or Denso).
4. Reinstall the ignition coils and connect electrical connections.
Tools Required: Spark plug socket, torque wrench
Safety Warnings: Avoid dropping debris into the combustion chamber.

4. Test and Replace Ignition Coils (if necessary)

Sub-steps:
1. Conduct a resistance test on each ignition coil using a multimeter.
2. Replace any coils that do not meet specifications.
Tools Required: Multimeter
Safety Warnings: Ensure the ignition system is de-energized before handling coils.

5. Check Fuel System

Sub-steps:
1. Use a fuel pressure gauge to check the fuel pressure at the rail.
2. Replace the fuel filter if it is clogged or hasn’t been changed per the maintenance schedule.
3. Inspect fuel injectors for clogs or leaks and clean or replace as needed.
Tools Required: Fuel pressure gauge, injector cleaning kit
Safety Warnings: Relieve fuel system pressure before disconnecting fuel lines.