why does my Honda Accord 9th Generation (2013-2017) feel like it’s losing grip when accelerating?

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

505 words

Problem Statement

Discover how to diagnose and fix loss of grip during acceleration in Honda Accord 2013-2017. Step-by-step guide with symptoms, diagnostics, and solutions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Ensure the vehicle is securely lifted and supported before working underneath.

Symptoms

•Loss of traction during acceleration
•Tire squealing or chirping noises
•Vehicle pulling to one side while accelerating
•Increased wheel spin on slippery surfaces
•Warning lights related to traction control illuminated

Diagnostic Steps

1
Inspect tire tread depth and condition for uneven wear or damage.
2
Check tire pressure to ensure it is within manufacturer specifications.
3
Examine suspension components for wear, including struts, shocks, and bushings.
4
Scan for error codes using an OBD-II scanner to check for any traction control or ABS system faults.
5
Inspect the drivetrain components, including the differential and CV joints, for any signs of damage or wear.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Tread depth gauge
•Socket set
•Jack and jack stands
•OBD-II scanner

Parts Required

•Replacement tires (if necessary)
•Suspension components (struts, shocks, bushings)
•CV joints (if necessary)
•Differential fluid (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire tread depth and condition for uneven wear or damage.
2
Check tire pressure to ensure it is within manufacturer specifications.
3
Examine suspension components for wear, including struts, shocks, and bushings.
4
Scan for error codes using an OBD-II scanner to check for any traction control or ABS system faults.
5
Inspect the drivetrain components, including the differential and CV joints, for any signs of damage or wear.

Solution

1. Preparation

Gather tools and materials necessary for inspection and repair.
Ensure the vehicle is parked on a level surface and securely raise it using a jack and jack stands.

2. Tire Inspection and Replacement

Check Tread Depth:
- Use a tread depth gauge to measure tire tread. Replace tires if tread is below 2/32 of an inch.
Inspect for Damage:
- Look for cuts, bulges, or sidewall damage. Replace damaged tires.
Check Tire Pressure:
- Use a tire pressure gauge to measure pressure. Inflate to manufacturer specifications as noted on the driver's door jamb.

3. Suspension Component Inspection and Replacement

Visually Inspect Components:
- Check struts, shocks, and bushings for wear or fluid leaks.
Replace Worn Components:
- If any components are worn, remove them using a socket set and replace with OEM parts. Torque the new components to manufacturer specifications.

4. Drivetrain Inspection and Repair

Inspect CV Joints and Differential:
- Look for grease leakage around CV joint boots and listen for clicking noises during turns.
- If damaged, replace CV joints using a socket set and torque to manufacturer specifications.
Check Differential Fluid:
- Inspect differential fluid level and condition. Change fluid if contaminated or low.