why does my Honda Accord 9th Generation (2013-2017) have a rough start after it rains

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

586 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix rough starting issues after rain in Honda Accord 9th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before removing components.

Symptoms

•Engine cranks but does not start immediately
•Rough idle after starting
•Engine stalling shortly after starting
•Increased difficulty in starting when the weather is humid
•Possible fuel odor during starting attempts

Diagnostic Steps

1
Inspect the ignition system for moisture intrusion, including spark plugs and ignition coils.
2
Check the air intake system for water ingress or blockages.
3
Scan for any error codes using an OBD-II scanner to identify related issues.
4
Examine the fuel system for signs of condensation or water in the fuel.
5
Inspect the battery terminals and connections for corrosion or moisture.
6
Test for proper function of the fuel pump and verify fuel pressure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Screwdriver set
•Fuel pressure gauge
•Wire brush
•Flashlight

Parts Required

•Spark plugs (if found faulty)
•Air filter (if damaged)
•Ignition coils (if moisture is persistent)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the ignition system for moisture intrusion, including spark plugs and ignition coils.
2
Check the air intake system for water ingress or blockages.
3
Scan for any error codes using an OBD-II scanner to identify related issues.
4
Examine the fuel system for signs of condensation or water in the fuel.
5
Inspect the battery terminals and connections for corrosion or moisture.
6
Test for proper function of the fuel pump and verify fuel pressure.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is cool.
Disconnect the negative battery terminal for safety.

2. Inspect Ignition System

Tools Required: Socket set, torque wrench, dielectric grease
Remove the engine cover (if applicable) using a socket set.
Disconnect the ignition coils from the spark plugs and inspect for moisture.
Remove the spark plugs and check for wear or fouling; replace if necessary.
Apply dielectric grease to the terminals of the ignition coils to prevent moisture intrusion.
Reinstall spark plugs and ignition coils, ensuring they are torqued to the manufacturer specifications (typically around 13 lb-ft).

3. Inspect Air Intake System

Tools Required: Screwdriver set, flashlight
Remove the air intake duct to gain access to the air filter.
Check the air filter for water damage. Replace if it is wet or clogged.
Inspect the intake manifold for water presence and dry it if necessary.
Reassemble the air intake system securely.

4. Check Fuel System

Tools Required: Fuel pressure gauge, wrench set
Attach a fuel pressure gauge to the fuel rail to monitor pressure during cranking.
If pressure is low, check the fuel pump relay and fuse.
If moisture is suspected in the fuel tank, consider using a fuel dryer additive or draining the tank if necessary.
Reconnect all components after inspection.

5. Inspect Battery Connections

Tools Required: Wire brush, socket set
Check battery terminals for corrosion; clean any buildup using a wire brush.
Ensure all connections are tight and free from moisture.
Reconnect the negative battery terminal.