why does my Honda Accord 9th Generation (2013-2017) jerk when shifting gears?

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

609 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before inspecting or working on the transmission.

Symptoms

•Jerking or shuddering sensation during gear changes
•Unusual noises during shifting (clunking or grinding)
•Delayed engagement when shifting from park to drive/reverse
•Engine RPM fluctuations during shifting
•Check engine light illuminated (potentially indicating transmission-related codes)

Diagnostic Steps

1
Scan the vehicle's OBD-II system for error codes related to the transmission.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for leaks around the pan and cooler lines.
4
Test the throttle position sensor (TPS) for proper voltage readings.
5
Examine the engine and transmission mounts for signs of wear or damage.
6
Check for proper operation of the shift linkage and cables.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Transmission fluid pump
•Socket set
•Drain pan
•Funnel
•Multimeter
•Torque wrench
•Pry bar
•Jack stands

Parts Required

•Transmission fluid
•Transmission filter (if applicable)
•Throttle position sensor (if faulty)
•Engine/transmission mounts (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for error codes related to the transmission.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for leaks around the pan and cooler lines.
4
Test the throttle position sensor (TPS) for proper voltage readings.
5
Examine the engine and transmission mounts for signs of wear or damage.
6
Check for proper operation of the shift linkage and cables.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a level surface and secure with wheel chocks.
Disconnect the negative terminal of the battery to prevent electrical hazards.

2. Check and Replace Transmission Fluid

Tools Required: Transmission fluid pump, socket set, drain pan, funnel
Remove the transmission drain plug and allow fluid to drain into the pan.
Inspect the drained fluid for metal shavings or debris.
Replace the drain plug with a new washer and torque to the manufacturer specification.
Use a transmission fluid pump to refill the transmission with the correct type of fluid (consult owner’s manual for specifications).

3. Replace Transmission Filter (if applicable)

Tools Required: Socket set, new transmission filter, gasket, torque wrench
Remove the transmission pan by unscrewing the bolts carefully.
Clean the pan and magnet inside for any debris.
Replace the old filter with a new one, ensuring it is seated properly.
Install a new gasket and reattach the pan, torquing to specification.

4. Inspect and Replace Throttle Position Sensor (if faulty)

Tools Required: Multimeter, socket set
Disconnect the electrical connector of the TPS.
Use a multimeter to check voltage readings at the TPS while manually moving the throttle.
If readings are outside of specification, replace the TPS with a new unit following the manufacturer’s guidelines.

5. Inspect and Replace Engine/Transmission Mounts (if damaged)

Tools Required: Socket set, pry bar, jack stands
Visually inspect the engine and transmission mounts for cracks or excessive wear.
If damaged, support the engine with a jack and replace the mounts using appropriate torque specifications for new mounts.