why does my Honda Accord 9th Generation (2013-2017) shake when I brake?

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

460 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the brake components to cool before handling.

Symptoms

•Shaking or vibration felt in the steering wheel when braking
•Pulsating brake pedal during braking
•Uneven wear on brake pads or rotors
•Increased stopping distance
•Noise coming from the brakes when applied

Diagnostic Steps

1
Inspect brake rotors for warping using a dial indicator.
2
Check brake pads for uneven wear or damage.
3
Examine the brake calipers for proper operation and sticking.
4
Inspect suspension components (e.g., control arms, bushings) for wear or damage.
5
Evaluate wheel alignment and balance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Micrometer

Parts Required

•Brake rotors
•Brake pads

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts required for the repair.
Park the vehicle on a flat surface and engage the parking brake.
Wear safety gloves and goggles.

2. Lift the Vehicle

Use a jack to lift the front of the vehicle and secure it with jack stands.
Remove the front wheels using a socket set.

3. Inspect and Replace Brake Rotors

Inspect: Measure rotor thickness with a micrometer; check for warping.
Replace:
- If warped, remove the brake caliper bolts with a socket wrench.
- Carefully slide the caliper off the rotor and suspend it (do not let it dangle by the brake line).
- Remove the rotor retaining screws (if applicable) and slide the rotor off.
- Install new rotors, ensuring proper alignment and securing screws.

4. Inspect and Replace Brake Pads

Remove the brake pads from the caliper bracket.
Inspect for wear; replace if necessary.
Install new brake pads, ensuring they are positioned correctly in the caliper bracket.

5. Reassemble and Test

Reattach the brake caliper to the bracket and tighten bolts to the manufacturer’s torque specification (usually around 20-30 lb-ft).
Reinstall the wheels and lower the vehicle.
Pump the brake pedal to ensure proper pad seating before taking a test drive.