why does my Honda Accord 9th Generation (2013-2017) transmission jerk when shifting

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

564 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms and solutions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool completely before beginning transmission work.

Symptoms

•Jerking or harsh shifting during gear changes
•Delay in engagement when accelerating
•Unusual noises (clunking or grinding) during shifts
•Engine RPM fluctuations during shifting
•Check engine light may be illuminated

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related codes.
2
Inspect transmission fluid level and condition; check for discoloration or burnt smell.
3
Check for signs of transmission fluid leaks around the transmission pan and seals.
4
Inspect the transmission mounts for wear or damage that may cause misalignment.
5
Test the transmission solenoids for proper operation using a multimeter.
6
Drive the vehicle to assess shifting patterns under various load conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Transmission fluid
•Funnel
•Torque wrench

Parts Required

•Transmission fluid (Honda ATF DW-1)
•Transmission filter (if applicable)
•Transmission solenoids (if necessary)
•Transmission mounts (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related codes.
2
Inspect transmission fluid level and condition; check for discoloration or burnt smell.
3
Check for signs of transmission fluid leaks around the transmission pan and seals.
4
Inspect the transmission mounts for wear or damage that may cause misalignment.
5
Test the transmission solenoids for proper operation using a multimeter.
6
Drive the vehicle to assess shifting patterns under various load conditions.

Solution

1. Preparation

Tools Required: OBD-II scanner, socket set, multimeter, transmission fluid, funnel, torque wrench.
Ensure vehicle is parked on a flat surface and the engine is off.
Disconnect the negative battery terminal to prevent electrical shocks.

2. Fluid Change

Sub-steps:
1. Raise the vehicle using a jack and secure it on jack stands.
2. Place a drain pan under the transmission pan.
3. Remove the transmission pan bolts using a socket set.
4. Carefully lower the pan to drain the old fluid.
5. Inspect the pan for metal shavings or debris; clean if necessary.
6. Replace the transmission filter if applicable.
7. Reinstall the transmission pan with a new gasket, torque bolts to manufacturer specifications (typically 7-9 ft-lbs).
8. Refill the transmission with new fluid using a funnel, ensuring the correct type (typically Honda ATF DW-1).

3. Solenoid Inspection and Replacement

Sub-steps:
1. Locate the transmission solenoid assembly and remove the necessary components to access it (may require removal of the transmission pan).
2. Disconnect the electrical connectors for the solenoids.
3. Test each solenoid using a multimeter for resistance; replace any that are out of spec.
4. Reinstall new solenoids if necessary, ensuring all electrical connections are secure.

4. Transmission Mount Replacement

Sub-steps:
1. Inspect the transmission mounts for signs of wear or cracking.
2. If damaged, support the transmission with a jack and remove the old mounts.
3. Install the new mounts, ensuring proper alignment and torque to specification.