why does my Honda Accord 9th Generation (2013-2017) transmission slip when I accelerate

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

482 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms and solutions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the electrical system.
•Allow the engine and transmission to cool before starting the repair process.

Symptoms

•Slipping sensation during acceleration
•Engine RPMs increasing without corresponding vehicle speed
•Check engine light illuminated
•Delayed or harsh shifting
•Fluid leaks under the vehicle
•Unusual noises (grinding or whining) from the transmission

Diagnostic Steps

1
Scan the vehicle's computer for error codes using an OBD-II scanner.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect for any visible fluid leaks around the transmission and cooler lines.
4
Test drive the vehicle to replicate the slipping under various conditions.
5
Examine the transmission filter for clogs or contamination.
6
Assess the transmission control module for proper function.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Transmission fluid drain pan
•Screwdrivers

Parts Required

•Honda DW-1 Automatic Transmission Fluid
•Transmission filter
•Transmission pan gasket

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's computer for error codes using an OBD-II scanner.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect for any visible fluid leaks around the transmission and cooler lines.
4
Test drive the vehicle to replicate the slipping under various conditions.
5
Examine the transmission filter for clogs or contamination.
6
Assess the transmission control module for proper function.

Solution

1. Preparation

Gather required tools and parts.
Ensure the vehicle is on a level surface.
Disconnect the battery for safety.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission dipstick and remove it.
2. Check the fluid level; if low, add the appropriate ATF (Honda DW-1).
3. If the fluid is dark or has a burnt smell, proceed to replace it.
4. Drain the old transmission fluid using a drain pan.
5. Replace the transmission pan gasket if necessary.

3. Inspect and Replace Transmission Filter

Sub-steps:
1. Remove the transmission pan by unscrewing the bolts.
2. Carefully lower the pan to avoid spilling fluid.
3. Remove the old filter and install the new filter.
4. Reinstall the transmission pan using a torque wrench to tighten the bolts to the manufacturer's specifications (typically 10-12 lb-ft).

4. Test Drive and Adjust Transmission Settings

Sub-steps:
1. Reconnect the battery.
2. Start the engine and allow it to reach operating temperature.
3. Test drive the vehicle to ensure smooth operation.
4. If slipping persists, consider reprogramming the transmission control module or seeking professional assistance.