why does my Honda Accord 9th Generation (2013-2017) vibrate when I brake

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

505 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake vibrations in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses when working on the brake system.
•Allow the brakes to cool before servicing to prevent burns.

Symptoms

•Steering wheel vibrates when braking
•Pulsation felt through brake pedal
•Increased stopping distance
•Uneven wear on brake pads
•Possible noise when braking

Diagnostic Steps

1
Inspect brake pads for uneven wear and thickness.
2
Check rotor condition for warping or scoring.
3
Examine brake calipers for proper function and sticking.
4
Assess wheel bearings for any play or wear.
5
Inspect suspension components for wear or damage.
6
Perform a visual inspection of the brake lines for leaks or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Torque wrench
•Caliper tool
•Brake cleaner

Parts Required

•Brake pads
•Brake rotors (if warped)
•Brake caliper (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for uneven wear and thickness.
2
Check rotor condition for warping or scoring.
3
Examine brake calipers for proper function and sticking.
4
Assess wheel bearings for any play or wear.
5
Inspect suspension components for wear or damage.
6
Perform a visual inspection of the brake lines for leaks or damage.

Solution

1. Preparation

Gather tools and safety equipment.
Park the vehicle on a flat surface and engage the parking brake.
Gather the following tools: jack, jack stands, lug wrench, torque wrench, caliper tool, and brake cleaner.

2. Remove Wheel

Loosen lug nuts slightly while the vehicle is still on the ground.
Raise the vehicle using a jack and secure it with jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect Brake Components

Brake Pads: Remove the caliper bolts and slide the caliper off. Inspect brake pads for uneven wear. Replace if they are worn unevenly or below the manufacturer's specifications.
Rotors: Check the rotor surface for warping or scoring. Use a runout gauge to measure any warp. If warped, replace or resurface the rotors according to specifications.
Calipers: Check for any sticking or binding. Clean and lubricate the caliper slides if necessary. If damaged, replace the caliper.

4. Reassemble Components

Install the new or resurfaced rotor onto the hub.
Reinstall the brake pads into the caliper bracket.
Slide the caliper back into position and tighten the caliper bolts to the manufacturer's torque specifications.
Reinstall the wheel and hand-tighten the lug nuts.

5. Lower Vehicle and Final Checks

Lower the vehicle off the jack stands.
Tighten the lug nuts to the specified torque in a crisscross pattern.
Test the brakes by pumping the brake pedal a few times to ensure proper seating of components.