why does my Honda Accord vibrate when I brake

Solution

1. Preparation

• Gather necessary tools and parts.
• Park the vehicle on a flat surface and engage the parking brake.
• Wear safety glasses and gloves.

2. Remove Wheel

• Use a lug wrench to loosen the lug nuts slightly while the vehicle is on the ground.
• Raise the vehicle using a jack and secure it with jack stands.
• Remove the lug nuts and take off the wheel.

3. Inspect Brake Components

• Brake Pads:
  • Check for uneven wear or thickness below manufacturer specifications.
  • Replace if necessary.
• Brake Rotors:
  • Measure thickness and check for warping using a dial indicator.
  • Resurface or replace if warped or below minimum thickness.

4. Reassemble Components

• Install new or resurfaced brake rotors onto the hub.
• Replace brake pads, ensuring proper orientation and alignment.
• Reinstall the wheel and hand-tighten the lug nuts.

5. Lower Vehicle and Torque Lug Nuts

• Carefully lower the vehicle from jack stands.
• Torque the lug nuts to the manufacturer’s specifications (usually around 80-100 ft-lbs depending on model).

6. Test Drive

• Conduct a test drive to ensure no vibrations occur during braking.
• Monitor braking performance and listen for any abnormal noises.