why is my Honda Accord 9th Generation (2013-2017) steering wheel shaking when braking

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

503 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix steering wheel shaking during braking in Honda Accord 2013-2017. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the braking system.
•Allow the brakes to cool before performing any inspections or repairs.

Symptoms

•Steering wheel vibrations when braking
•Uneven brake pad wear
•Pulsating brake pedal feel
•Increased stopping distance
•Possible noise during braking (squealing or grinding)

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear.
2
Check brake pads for thickness and even wear.
3
Examine wheel alignment and suspension components for damage or wear.
4
Perform a visual inspection of the wheel bearings.
5
Test brake system components for proper operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Socket set
•Torque wrench
•Jack and jack stands
•Brake cleaner
•Micrometer or straight edge

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and engage the parking brake.
Wear safety glasses and gloves.

2. Remove Front Wheel

Use a lug wrench to loosen the lug nuts slightly.
Raise the front of the vehicle with a jack and secure it with jack stands.
Remove the lug nuts completely and take off the front wheel.

3. Inspect and Replace Brake Rotors

Inspection:
- Check the rotors for warping or deep grooves using a micrometer or straight edge.
Replacement (if necessary):
- Remove the caliper bolts using a socket wrench.
- Carefully slide the caliper off the rotor and hang it with a bungee cord (do not let it hang by the brake line).
- Remove the rotor by unscrewing any retaining screws or sliding it off the hub.
- Install the new rotor, ensuring it is seated properly.
- Reinstall the caliper over the new rotor and tighten the caliper bolts to the manufacturer's specifications (typically 25-35 lb-ft).

4. Inspect and Replace Brake Pads

Remove the brake pads from the caliper bracket.
Check for uneven wear; replace if necessary.
Install new brake pads, ensuring they slide smoothly into the caliper bracket.

5. Reassemble and Test

Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle from the jack stands and fully tighten the lug nuts in a star pattern to the specified torque (typically 80-100 lb-ft).
Test brake function at low speeds to ensure proper installation and operation.