why is my Honda Accord making a clunking noise when shifting gears

Solution

1. Preparation

• Gather tools and parts required for inspection and repair.
• Ensure the vehicle is parked on a level surface and engage the parking brake.
• Disconnect the battery to prevent any electrical issues.

2. Transmission Fluid Change

1. Drain the Old Fluid

   • Locate the transmission pan and place a drain pan underneath.
   • Remove the transmission pan bolts using a socket set and allow the old fluid to drain completely.
   • Clean the pan and remove the old gasket material.

2. Replace the Filter

   • Remove the old transmission filter and replace it with a new one.
   • Ensure the new filter is seated properly.

3. Install New Gasket and Pan

   • Place a new gasket on the transmission pan.
   • Reinstall the pan and torque the bolts to the manufacturer’s specifications (usually around 10-12 ft-lbs).

4. Add New Transmission Fluid

   • Using a funnel, add the appropriate type and amount of new transmission fluid (refer to the owner’s manual for specifications).

3. Inspect and Replace Mounts

1. Remove the Old Transmission Mount

   • Support the transmission with a jack.
   • Remove the bolts securing the transmission mount using a socket set.
   • Carefully lift the transmission slightly to remove the mount.

2. Install New Transmission Mount

   • Position the new mount and secure it with the previously removed bolts.
   • Torque the bolts to the manufacturer’s specifications.

4. Inspect Driveshaft and CV Joints

1. Visual Inspection

   • Check for any visible damage or excessive play in the driveshaft and CV joints.
   • Look for torn boots or leaking grease.

2. Replace Damaged Parts

   • If damage is found, remove the driveshaft or CV joint as necessary.
   • Install new components ensuring proper alignment and secure all bolts.