how to fix Honda Accord 10th Generation (2018-2022) grinding brakes noise

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

599 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding brakes noise in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always engage the parking brake before working on brake components.
•Allow the vehicle to cool before working on hot brake parts.

Symptoms

•Grinding noise when applying brakes
•Squeaking or squealing sounds during braking
•Vibration or pulsation in the brake pedal
•Reduced braking performance
•Brake warning light illuminated on the dashboard

Diagnostic Steps

1
Inspect brake pads visually for wear indicators and thickness.
2
Check brake rotors for scoring, warping, or uneven surfaces.
3
Examine the brake calipers for proper operation and any signs of leakage.
4
Inspect the brake lines for damage or corrosion.
5
Test brake fluid level and quality.
6
Listen for abnormal sounds from the brake system while applying brakes in a safe environment.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Brake pad spreader
•Jack
•Jack stands
•Brake rotor gauge

Parts Required

•New brake pads
•New brake rotors (if necessary)
•Brake fluid (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads visually for wear indicators and thickness.
2
Check brake rotors for scoring, warping, or uneven surfaces.
3
Examine the brake calipers for proper operation and any signs of leakage.
4
Inspect the brake lines for damage or corrosion.
5
Test brake fluid level and quality.
6
Listen for abnormal sounds from the brake system while applying brakes in a safe environment.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.
Wear safety gloves and goggles for protection.

2. Remove Wheel Assembly

Tools Required: Socket set, jack, jack stands.
Sub-steps:
1. Loosen wheel lug nuts slightly while the vehicle is on the ground.
2. Raise the vehicle using a jack and secure it with jack stands.
3. Remove the wheel by taking off the lug nuts completely.

3. Inspect and Replace Brake Pads

Tools Required: Torque wrench, brake pad spreader.
Sub-steps:
1. Remove the caliper bolts using a socket.
2. Carefully slide the caliper off the brake rotor.
3. Remove the old brake pads from the caliper bracket.
4. Compare new brake pads with old ones to ensure correct size.
5. Install new brake pads into the bracket.

4. Inspect and Resurface or Replace Rotors

Tools Required: Brake rotor gauge, torque wrench.
Sub-steps:
1. Check the rotor thickness using a caliper gauge; replace if below minimum specifications.
2. If the rotor is salvageable, use a brake lathe to resurface it. If damaged, replace with new rotors.
3. Install the rotors back onto the hub.

5. Reassemble Brake Caliper and Wheel

Tools Required: Torque wrench.
Sub-steps:
1. Reattach the brake caliper over the new pads and rotor.
2. Secure caliper bolts to manufacturer-recommended torque specifications.
3. Reinstall the wheel and hand-tighten the lug nuts.
4. Lower the vehicle and tighten the lug nuts fully in a crisscross pattern to ensure even seating.

6. Test Brake System

Tools Required: None.
Sub-steps:
1. Start the vehicle and pump the brake pedal a few times to seat the pads.
2. Conduct a test drive to confirm that the grinding noise has stopped and braking performance is restored.