how to fix Honda Accord 10th Generation (2018-2022) rearview camera not working

Honda Accord 8th Generation (2008-2012)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

534 words

Problem Statement

Learn how to diagnose and fix the rearview camera issue in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms and solutions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to prevent short circuits.

Symptoms

•Rearview camera display is blank when shifting into reverse
•Camera System Malfunction message displayed on the infotainment screen
•Image appears distorted or low-quality when the camera activates
•No sound from proximity sensors (if equipped)
•Check for any blown fuses related to camera or infotainment system

Diagnostic Steps

1
Inspect the rearview camera lens for dirt or obstructions.
2
Check the vehicle's fuse box for any blown fuses related to the rearview camera.
3
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the camera system.
4
Verify the camera connection at the rear of the vehicle for loose or corroded connectors.
5
Test the camera output using a multimeter to ensure proper voltage is being supplied.
6
Inspect the infotainment system settings to ensure the camera feature is enabled.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdriver set
•Fuse puller or needle-nose pliers
•Cleaning solution
•Microfiber cloth

Parts Required

•Replacement fuse (if blown)
•Camera connector (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Rearview camera display is blank when shifting into reverse

•Camera System Malfunction message displayed on the infotainment screen

•Image appears distorted or low-quality when the camera activates

•No sound from proximity sensors (if equipped)

•Check for any blown fuses related to camera or infotainment system

Diagnostic Steps

1
Inspect the rearview camera lens for dirt or obstructions.
2
Check the vehicle's fuse box for any blown fuses related to the rearview camera.
3
Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) related to the camera system.
4
Verify the camera connection at the rear of the vehicle for loose or corroded connectors.
5
Test the camera output using a multimeter to ensure proper voltage is being supplied.
6
Inspect the infotainment system settings to ensure the camera feature is enabled.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the ignition is off.
Disconnect the negative battery terminal to ensure safety while working on electrical components.

2. Inspect and Clean Camera

Tools Required: Cleaning solution, microfiber cloth
Clean the camera lens with a microfiber cloth and appropriate cleaning solution to remove dirt or obstructions.

3. Check and Replace Fuses

Tools Required: Fuse puller or needle-nose pliers
Locate the fuse box (usually under the dashboard or in the engine compartment).
Identify the fuse associated with the rearview camera using the fuse diagram.
Remove the fuse to inspect it; replace it if blown with a new fuse of the same amperage.

4. Inspect Camera Wiring and Connector

Tools Required: Screwdriver set, multimeter
Remove any covers or panels to access the camera wiring.
Check the camera connector for any corrosion or damage. Clean or replace as necessary.
Use a multimeter to test for voltage at the camera connector while the vehicle is in reverse. Ensure it matches the specification.

5. Reset Infotainment System

Tools Required: None
Turn on the vehicle, and leave the infotainment system on for about 10 minutes.
Perform a hard reset by pressing and holding the power button for 10 seconds until the system restarts.