FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the interior lights staying on in my Honda Accord 10th Generation (2018-2022) - Honda Accord
Home/Cars/Honda/Accord/8th Generation (2008-2012)/how to fix the interior lights staying on in my Honda Accord 10th Generation (2018-2022)

how to fix the interior lights staying on in my Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
500 words

Problem Statement

Learn how to fix interior lights staying on in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic steps and repair instructions.

Affected Component
Electrical
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to prevent short circuits.

Symptoms

  • •Interior lights do not turn off after closing doors
  • •Dome light stays on while driving
  • •Battery drains prematurely
  • •Door ajar warning light illuminated on the dashboard
  • •Unusual clicking or buzzing sound from light switch

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •OBD-II scanner
  • •Screwdriver set
  • •Wire connectors
  • •Electrical tape

Parts Required

  • •Door switches (if malfunctioning)
  • •Interior light switch (if faulty)
  • •Wiring (if damaged)

Additional Information

Affected Component
Electrical
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts.
  • Ensure the vehicle is parked in a safe location.
  • Disconnect the battery to prevent accidental short circuits.

Tools Required:

  • Multimeter
  • OBD-II scanner
  • Screwdriver set
  • Wire connectors (if needed)
  • Electrical tape
2. Inspect Door Switches
  • Remove the door panel to access the door switch.
  • Check the switch for proper operation by pressing it manually and observing the interior light response.
  • If the switch is stuck or malfunctioning, replace it.
3. Check Interior Light Switch
  • Locate the interior light switch, usually on the overhead console.
  • Ensure the switch is in the "auto" or "off" position, and not in the "on" position.
  • If the switch is faulty, replace it.
4. Inspect Wiring and Connectors
  • Examine the wiring harness connected to the interior lights for fraying, breaks, or corrosion.
  • If any damage is found, repair the wiring using electrical tape or replace the affected sections with new wire connectors.
5. Test the System
  • Reconnect the battery.
  • Close all doors and check if the interior lights turn off after a few minutes.
  • Monitor the door ajar warning light to ensure it no longer illuminates unnecessarily.