how to fix the rear view camera not working in my Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

495 words

Problem Statement

Learn how to diagnose and fix the rear view camera issue in Honda Accord 10th Generation (2018-2022). Step-by-step guide with tools and tips.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on any electrical components to avoid shock or short circuits.

Symptoms

•Rear view camera display is blank or shows a black screen
•"Camera System Error" message on the infotainment screen
•Camera image is distorted or fuzzy
•No response when shifting the vehicle into reverse
•Backup sensors may not engage properly

Diagnostic Steps

1
Check for any blown fuses related to the camera system using the fuse box diagram.
2
Inspect the camera lens for dirt, debris, or obstructions that may hinder visibility.
3
Scan the vehicle’s onboard computer for any diagnostic trouble codes (DTCs) using an OBD-II scanner.
4
Verify the wiring connections at the rear camera and the infotainment system for any loose or damaged wires.
5
Test the camera power supply by measuring voltage at the camera connector with a multimeter.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Fuse puller
•Screwdriver set
•Soft cloth or lens cleaning solution

Parts Required

•Replacement fuse (if applicable)
•Rear view camera assembly (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any blown fuses related to the camera system using the fuse box diagram.
2
Inspect the camera lens for dirt, debris, or obstructions that may hinder visibility.
3
Scan the vehicle’s onboard computer for any diagnostic trouble codes (DTCs) using an OBD-II scanner.
4
Verify the wiring connections at the rear camera and the infotainment system for any loose or damaged wires.
5
Test the camera power supply by measuring voltage at the camera connector with a multimeter.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to ensure safety while working on electrical components.

2. Inspect and Clean Camera

Remove any dirt or debris from the camera lens using a soft cloth or lens cleaning solution.
Ensure the camera is properly aligned and does not have physical damage.

3. Check and Replace Fuses

Locate the fuse box (usually under the dashboard or in the engine compartment).
Identify the fuse related to the rear view camera (refer to the vehicle’s manual).
Remove the fuse using a fuse puller and check if it’s blown. Replace with a new fuse of the same amperage if necessary.

4. Repair or Replace Wiring

Examine the wiring harness connecting the camera to the vehicle's electrical system.
Use a multimeter to check for continuity in the wires.
Repair any damaged wires using electrical tape or replace the harness if necessary.

5. Test Rear View Camera

Reconnect the negative battery terminal.
Start the vehicle and shift into reverse to check if the camera activates.
If the issue persists, consider replacing the rear view camera assembly.