how to reset the maintenance light on my Honda Accord 10th Generation (2018-2022)

Honda Accord 8th Generation (2008-2012)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

342 words

Problem Statement

Learn how to reset the maintenance light on your Honda Accord 10th Generation (2018-2022) with this quick and easy step-by-step guide.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stationary position before performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•Reminder message appears on the display
•Vehicle has received scheduled maintenance (oil change, filter replacement, etc.)

Diagnostic Steps

1
Ensure the vehicle is parked with the ignition in the OFF position.
2
Insert the key into the ignition or press the start button without pressing the brake pedal (for push-start models).
3
Locate the trip/reset button on the dashboard.
4
Turn the ignition to the ON position without starting the engine.
5
Press and hold the trip/reset button until the maintenance light begins to blink and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked with the ignition in the OFF position.
2
Insert the key into the ignition or press the start button without pressing the brake pedal (for push-start models).
3
Locate the trip/reset button on the dashboard.
4
Turn the ignition to the ON position without starting the engine.
5
Press and hold the trip/reset button until the maintenance light begins to blink and then turns off.

Solution

1. Preparation

Ensure the vehicle is in a safe location.
Have the vehicle in the OFF position before starting the reset process.

2. Accessing the Ignition

Insert the key into the ignition or press the start button to enter the ON position.
Do not start the engine, just ensure all dashboard lights are illuminated.

3. Resetting the Maintenance Light

Locate the trip/reset button on the dashboard, often found near the speedometer.
Press and hold the trip/reset button until the maintenance light begins to blink.
Continue to hold the button until the light turns off, indicating the reset is complete.