FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Accord 10th Generation (2018-2022) has low oil pressure light on, what should I do - Honda Accord
Home/Cars/Honda/Accord/8th Generation (2008-2012)/my Honda Accord 10th Generation (2018-2022) has low oil pressure light on, what should I do

my Honda Accord 10th Generation (2018-2022) has low oil pressure light on, what should I do

Honda Accord 8th Generation (2008-2012)

Error Codes
1-3 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
604 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix low oil pressure light issues in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms and solutions.

Affected Component
Engine
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow engine to cool before opening the oil drain plug or removing components.

Symptoms

  • •Low oil pressure warning light illuminated on the dashboard
  • •Engine noise or ticking sounds
  • •Decreased engine performance or responsiveness
  • •Oil leaks observed under the vehicle
  • •Unusual engine temperature readings

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Mechanical oil pressure gauge
  • •Oil filter wrench
  • •Socket set
  • •Torque wrench
  • •Drain pan

Parts Required

  • •Engine oil (specific to Honda Accord specifications)
  • •Oil filter
  • •Oil pressure sending unit (if faulty)

Additional Information

Affected Component
Engine
Estimated Time
1-3 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery to prevent any electrical issues.
2. Check and Replace Engine Oil

  1. Drain Old Oil:

    • Place a drain pan under the oil pan.
    • Remove the oil drain plug using a socket wrench and allow the old oil to completely drain.
    • Replace the drain plug and torque it to the manufacturer's specification (typically around 20 lb-ft).

  2. Replace Oil Filter:

    • Use an oil filter wrench to remove the old oil filter.
    • Apply a thin layer of fresh oil to the rubber gasket of the new oil filter.
    • Install the new oil filter and tighten it according to manufacturer specifications.

  3. Add New Oil:

    • Pour in the appropriate type and amount of engine oil as specified in the owner's manual (usually around 4.5 to 5.5 quarts).
    • Recheck the oil level with the dipstick and add more oil if necessary.
3. Replace Oil Pressure Sending Unit (if faulty)

  1. Locate the Sending Unit:

    • Identify the oil pressure sending unit, typically located near the oil filter or on the engine block.

  2. Remove the Sending Unit:

    • Disconnect any electrical connections.
    • Use a wrench to unscrew the sending unit.

  3. Install New Sending Unit:

    • Apply thread sealant to the threads of the new sending unit.
    • Screw it into place and tighten securely.
    • Reconnect the electrical connection.
4. Reconnect Battery and Start Engine
  • Reconnect the battery terminals.
  • Start the engine and let it idle for a few minutes, checking for any leaks and ensuring the oil pressure light turns off.