FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Accord 8th Generation (2008-2012) wipers won't turn off what to do - Honda Accord
Home/Cars/Honda/Accord/8th Generation (2008-2012)/my Honda Accord 8th Generation (2008-2012) wipers won't turn off what to do

my Honda Accord 8th Generation (2008-2012) wipers won't turn off what to do

Honda Accord 8th Generation (2008-2012)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
523 words

Problem Statement

Learn how to diagnose and fix windshield wipers that won't turn off in Honda Accord 2008-2012. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to prevent short circuits.

Symptoms

  • •Windshield wipers continue to operate after turning the switch off
  • •Wiper delay function may not work correctly
  • •Wipers may activate unexpectedly
  • •Possible squeaking or grinding noise from wipers
  • •Battery drainage if wipers remain operational for an extended period

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Wrench set
  • •Multimeter
  • •OBD-II scanner
  • •Socket set

Parts Required

  • •Wiper switch (if faulty)
  • •Wiper relay (if faulty)
  • •Wiper motor (if faulty)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: Wrench set, multimeter, OBD-II scanner, socket set.
  • Disconnect the negative battery terminal to ensure safety during repairs.
2. Inspect and Replace Wiper Switch
  • Sub-steps:
    1. Remove the steering column cover using a socket set.
    2. Disconnect the wiper switch connector from the back of the switch.
    3. Test the wiper switch with a multimeter to ensure continuity in all positions.
    4. If faulty, replace the wiper switch with a new one.
    5. Reconnect the switch and reassemble the steering column cover.
3. Check and Replace Wiper Relay
  • Sub-steps:
    1. Locate the wiper relay in the fuse box (refer to the owner’s manual for specific location).
    2. Remove the relay and test it with a multimeter for continuity.
    3. If the relay is defective, replace it with a new OEM relay.
    4. Reinsert the relay into the fuse box.
4. Inspect Wiring and Connectors
  • Sub-steps:
    1. Visually inspect the wiring harness connected to the wiper motor for any signs of damage.
    2. Use a multimeter to check for continuity and shorts in the wiring.
    3. Repair or replace any damaged wiring or connectors.
5. Test Wiper Motor Functionality
  • Sub-steps:
    1. Disconnect the wiper motor connector.
    2. Apply direct power to the motor using jumper wires to see if it functions properly and turns off when power is removed.
    3. If the motor continues to run, replace the wiper motor.
    4. Reconnect all components and ensure everything is secured.