what causes suspension noise in my Honda Accord 10th Generation (2018-2022) when going over bumps

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

426 words

Problem Statement

Learn how to diagnose and fix suspension noise in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on any suspension components.
•Ensure the vehicle is securely supported before working underneath it.

Symptoms

•Clunking or knocking noise from the front or rear suspension
•Creaking or squeaking sounds during suspension movement
•Increased rattling from the vehicle's undercarriage
•Poor ride comfort or handling
•Visible wear or damage to suspension components during inspection

Diagnostic Steps

1
Inspect the suspension components visually for any signs of wear, damage, or looseness.
2
Check the condition of the struts and shocks for leaks or physical damage.
3
Examine the sway bar links and bushings for wear and proper attachment.
4
Perform a bounce test on each corner of the vehicle to assess shock absorber performance.
5
Listen for noise while gently rocking the vehicle back and forth to isolate the source of the sound.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Jack and jack stands
•Wrench set

Parts Required

•Struts or shocks (if worn)
•Sway bar links
•Suspension bushings

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the suspension components visually for any signs of wear, damage, or looseness.
2
Check the condition of the struts and shocks for leaks or physical damage.
3
Examine the sway bar links and bushings for wear and proper attachment.
4
Perform a bounce test on each corner of the vehicle to assess shock absorber performance.
5
Listen for noise while gently rocking the vehicle back and forth to isolate the source of the sound.

Solution

1. Preparation

Gather tools and parts required.
Elevate the vehicle using a jack and secure it on jack stands.
Remove the wheels for better access to suspension components.

2. Inspect and Replace Worn Components

Struts/Shocks:
- Remove the strut assembly from the vehicle.
- Inspect for leaks, and replace if necessary.
- Install new struts/shocks, ensuring proper torque settings (consult manufacturer specifications).
Sway Bar Links:
- Remove the sway bar links if they appear damaged or worn.
- Install new sway bar links, tightening to manufacturer specifications.
Bushings:
- Check all rubber bushings for cracks or deterioration.
- Replace any worn bushings with new ones, ensuring correct alignment during installation.

3. Reassemble and Test

Reinstall the wheels and lower the vehicle to the ground.
Ensure all bolts are torqued to specifications.
Perform a test drive to verify the noise has been eliminated.