why does my Honda Accord 10th Generation (2018-2022) have a check engine light and shaking

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

564 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix check engine light and shaking issues in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic procedures.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before opening any components.

Symptoms

•Check engine light illuminated
•Engine shaking or vibrating during idle
•Rough acceleration or loss of power
•Decreased fuel efficiency
•Unusual exhaust emissions or noise

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific trouble codes.
2
Inspect spark plugs for wear or fouling and check their gap.
3
Check for vacuum leaks in hoses and the intake manifold.
4
Examine the ignition coils for faults or damage.
5
Test fuel pressure to ensure the fuel delivery system is functioning correctly.
6
Evaluate the engine mounts for wear or damage that could contribute to shaking.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Fuel pressure gauge
•Carburetor cleaner

Parts Required

•Spark plugs (if needed)
•Ignition coils (if needed)
•Vacuum hoses (if needed)
•Fuel filter (if needed)
•Engine mounts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific trouble codes.
2
Inspect spark plugs for wear or fouling and check their gap.
3
Check for vacuum leaks in hoses and the intake manifold.
4
Examine the ignition coils for faults or damage.
5
Test fuel pressure to ensure the fuel delivery system is functioning correctly.
6
Evaluate the engine mounts for wear or damage that could contribute to shaking.

Solution

1. Preparation

Gather all tools and parts needed.
Disconnect the battery to ensure safety while working on electrical components.

2. Inspect and Replace Spark Plugs

Remove the engine cover if necessary using a socket set.
Disconnect the electrical connectors from the ignition coils.
Remove the ignition coils using a socket set and inspect the spark plugs.
Replace spark plugs if they are worn or fouled, ensuring to use the correct type and gap specifications (typically 0.043 inches for most Honda engines).
Reinstall the ignition coils and reattach the connectors.

3. Check and Replace Ignition Coils

If the ignition coils are found to be faulty during inspection, remove them using a socket set.
Install new ignition coils, ensuring they click into place.
Reconnect the electrical connectors to each coil.

4. Inspect for Vacuum Leaks

Visually inspect all vacuum hoses for cracks or disconnections.
If a leak is suspected, spray carburetor cleaner around the hoses while the engine is running to check for RPM changes.
Replace any damaged hoses as necessary.

5. Test Fuel Pressure

Connect a fuel pressure gauge to the fuel rail.
Turn the ignition to the "ON" position (without starting) and check the pressure reading against manufacturer specifications (typically around 30-50 PSI).
If pressure is low, inspect the fuel pump and filter, replacing them if needed.

6. Check Engine Mounts

Visually inspect engine mounts for cracks or separation.
If damaged, replace engine mounts following manufacturer specifications for torque values during installation.