why does my Honda Accord 10th Generation (2018-2022) make a clunking noise when driving

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

434 words

Problem Statement

Learn how to diagnose and fix clunking noise in Honda Accord 10th Generation (2018-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted and supported before working underneath.
•Disconnect the battery before working on electrical systems to avoid shorts or shocks.

Symptoms

•Clunking noise when accelerating or decelerating
•Noise when going over bumps or potholes
•Vibration felt through the steering wheel
•Potential knocking sound during turns
•Possible loss of handling stability

Diagnostic Steps

1
Inspect the suspension components visually for wear or damage.
2
Check for loose or damaged exhaust system mounts.
3
Examine the CV joints and axles for signs of wear or play.
4
Test drive the vehicle to replicate the noise and identify when it occurs.
5
Check engine and transmission mounts for wear or damage.
6
Inspect the wheel bearings for excessive play.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Pry bar
•Screwdriver set

Parts Required

•Replacement suspension components (e.g., control arms, bushings)
•Replacement CV joint or axle
•Engine and transmission mounts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the suspension components visually for wear or damage.
2
Check for loose or damaged exhaust system mounts.
3
Examine the CV joints and axles for signs of wear or play.
4
Test drive the vehicle to replicate the noise and identify when it occurs.
5
Check engine and transmission mounts for wear or damage.
6
Inspect the wheel bearings for excessive play.

Solution

1. Preparation

Gather tools and parts required for repair.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery before beginning work on electrical components.

2. Inspect and Replace Suspension Components

Sub-steps:
1. Lift the front or rear of the vehicle using a jack and secure it with jack stands.
2. Remove the wheel to access suspension components.
3. Inspect control arms, bushings, and struts for damage or wear.
4. Replace any worn or damaged suspension components with new parts.
5. Reinstall the wheel and lower the vehicle.

3. Check and Repair CV Joints and Axles

Sub-steps:
1. Remove the wheel and inspect the CV joints for cracks or grease leaks.
2. If damaged, remove the axle nut using a socket and ratchet.
3. Disconnect the lower control arm or strut to free the axle from the hub.
4. Slide out the damaged axle and replace it with a new one.
5. Reassemble all components, ensuring all fasteners are torqued to manufacturer specifications.

4. Inspect Engine and Transmission Mounts

Sub-steps:
1. Visually inspect engine and transmission mounts for cracks or separation.
2. If damaged, remove the mounting bolts using a socket set.
3. Replace with new mounts and re-torque to manufacturer specifications.
4. Ensure all mounts are securely fastened before moving on.

Tools Required:

Jack and jack stands
Socket set
Torque wrench
Pry bar
Screwdriver set

Parts Required:

Replacement suspension components (e.g., control arms, bushings)
Replacement CV joint or axle
Engine and transmission mounts (if needed)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Always ensure the vehicle is securely lifted and supported before working underneath.
Disconnect the battery before working on electrical systems to avoid shorts or shocks.