why does my Honda Accord 10th Generation (2018-2022) make a loud noise when I accelerate

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

546 words

Problem Statement

Learn how to diagnose and fix loud noise during acceleration in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Exhaust System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems
•Allow the engine to cool before opening any components

Symptoms

•Loud noise from the engine or exhaust during acceleration
•Possible vibration felt in the vehicle
•Decreased acceleration performance
•Check engine light may be illuminated
•Unusual sounds such as rattling or grinding

Diagnostic Steps

1
Scan for error codes using OBD-II scanner
2
Inspect exhaust system for leaks, loose connections, or damaged components
3
Check engine mounts for wear or damage
4
Inspect air intake system for obstructions or leaks
5
Conduct a test drive to replicate the noise
6
Use a mechanic's stethoscope to pinpoint the origin of the noise

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Jack and jack stands
•Mechanic's stethoscope
•Safety goggles
•Gloves
•Torque wrench

Parts Required

•Replacement engine mounts (if necessary)
•Air filter (if dirty)
•Exhaust components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using OBD-II scanner
2
Inspect exhaust system for leaks, loose connections, or damaged components
3
Check engine mounts for wear or damage
4
Inspect air intake system for obstructions or leaks
5
Conduct a test drive to replicate the noise
6
Use a mechanic's stethoscope to pinpoint the origin of the noise

Solution

1. Preparation

Tools Required: OBD-II scanner, socket set, jack and jack stands, mechanic's stethoscope, safety goggles, gloves.
Ensure the vehicle is parked on a level surface and the engine is cool before starting repairs.

2. Address Exhaust System Issues

Inspect and Repair:
- Raise the vehicle using a jack and secure it with jack stands.
- Inspect the exhaust system from the manifold to the tailpipe for any cracks, holes, or loose connections.
- Tighten any loose bolts or clamps and replace any damaged sections of the exhaust.

3. Replace Engine Mounts (if necessary)

Remove Old Mounts:
- Support the engine with a jack and a piece of wood to prevent damage.
- Remove the bolts securing the engine mount to the engine and the frame.
Install New Mounts:
- Position the new engine mount in place and secure it with bolts to the engine and frame.
- Torque bolts to manufacturer specifications (consult service manual for exact torque values).

4. Repair Air Intake System

Inspect and Replace:
- Check the air filter and intake hoses for blockages or damage.
- Replace the air filter if dirty and ensure all hoses are securely connected without cracks.