why does my Honda Accord 10th Generation (2018-2022) shake when I brake?

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

524 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in Honda Accord 10th Generation (2018-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the braking system.
•Allow the brakes to cool before servicing to prevent burns.

Symptoms

•Steering wheel shakes during braking
•Vehicle shakes or vibrates at certain speeds
•Increased braking distance
•Pedal pulsation when braking
•Unusual noises from the braking system

Diagnostic Steps

1
Inspect the brake pads for wear and damage.
2
Check the condition of the brake rotors for warping or uneven surfaces.
3
Examine the wheel bearings for play or wear.
4
Inspect suspension components, including struts and control arms.
5
Ensure that the tires are properly inflated and balanced.
6
Scan for any error codes related to the braking system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Torque wrench
•Brake cleaner
•Caliper tool
•Dial indicator

Parts Required

•Brake pads (if worn)
•Brake rotors (if warped)
•Brake fluid (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the brake pads for wear and damage.
2
Check the condition of the brake rotors for warping or uneven surfaces.
3
Examine the wheel bearings for play or wear.
4
Inspect suspension components, including struts and control arms.
5
Ensure that the tires are properly inflated and balanced.
6
Scan for any error codes related to the braking system.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a level surface and the parking brake is engaged.
Tools Required: Jack and jack stands, lug wrench, torque wrench, brake cleaner, caliper tool, and a dial indicator (for rotor inspection).

2. Remove Wheel

Loosen the lug nuts slightly (do not remove completely).
Raise the vehicle using a jack and securely place it on jack stands.
Remove the lug nuts and take off the wheel.

3. Inspect Brake Components

Brake Pads: Remove the caliper using a socket set. Check the brake pads for thickness and even wear. Replace if worn below the manufacturer’s specifications.
Brake Rotors: Use a dial indicator to check the rotor for runout. If warped, replace the rotors. Clean with brake cleaner before installation.

4. Replace Components (if necessary)

If the brake pads or rotors are worn or damaged, replace them.
Reinstall the caliper and torque the bolts to the manufacturer’s specifications (usually around 25-35 ft-lbs).

5. Reassemble and Reinstall Wheel

Place the wheel back on the hub.
Hand-tighten the lug nuts, then lower the vehicle.
Torque the lug nuts to the manufacturer's specifications (usually around 80-100 ft-lbs).

6. Final Inspection

Check the brake fluid level and top off if necessary.
Test the brakes in a safe area before driving normally.