why does my Honda Accord 8th Generation (2008-2012) shake when I brake?

Honda Accord 8th Generation (2008-2012)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

467 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in Honda Accord 8th Generation (2008-2012). Step-by-step guide with symptoms and solutions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted before working underneath it.
•Allow brakes to cool before handling any components after driving.

Symptoms

•Steering wheel shakes while braking
•Vehicle vibrates noticeably during braking
•Increased stopping distance
•Brake pedal pulsation
•Possible noise from the braking system

Diagnostic Steps

1
Inspect brake pads for wear and unevenness.
2
Check brake rotors for warping or scoring using a dial indicator.
3
Examine suspension components for wear or damage including control arms and bushings.
4
Verify wheel alignment and balance.
5
Inspect tires for uneven wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Brake caliper tool
•Socket set
•Dial indicator

Parts Required

•Brake pads
•Brake rotors (if warped)
•Brake caliper bolts (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts required.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery (if working on electrical components).

2. Remove Wheel

Tools Required: Jack, jack stands, lug wrench.
Loosen the lug nuts slightly while the vehicle is on the ground.
Use the jack to lift the vehicle and place jack stands for safety.
Remove the lug nuts completely and take off the wheel.

3. Inspect and Replace Brake Components

Tools Required: Brake caliper tool, socket set.
Check the brake pads for thickness; replace if less than 3mm.
Remove the brake caliper by unscrewing the caliper bolts and carefully sliding it off the rotor.
Inspect the brake rotor for warping; use a dial indicator to measure runout.
If warped, replace the rotor as per specifications.
Install new brake pads as needed, ensuring proper orientation and fit.

4. Reassemble Components

Reattach the brake caliper over the new pads and rotor.
Tighten caliper bolts to manufacturer torque specifications (usually around 25-35 ft-lbs).
Reinstall the wheel and hand-tighten the lug nuts.

5. Lower Vehicle and Final Checks

Lower the vehicle off the jack stands and remove the jack.
Tighten lug nuts in a crisscross pattern to the specified torque value (typically 80-100 ft-lbs).
Reconnect the battery.