FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Accord has a delay when I press the gas pedal, why? - Honda Accord
Home/Cars/Honda/Accord/9th Generation (2013-2017)/my Honda Accord has a delay when I press the gas pedal, why?

my Honda Accord has a delay when I press the gas pedal, why?

Honda Accord 9th Generation (2013-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
528 words

Problem Statement

Learn how to diagnose and fix throttle response delay in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before performing repairs on any engine components.

Symptoms

  • •Delay in acceleration upon pressing the gas pedal
  • •Engine stalling or hesitation during acceleration
  • •Poor fuel economy
  • •Check engine light illuminated
  • •Unusual engine noise or vibration during acceleration

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Throttle body cleaner
  • •Fuel pressure gauge
  • •Socket set
  • •Screwdriver set

Parts Required

  • •Accelerator pedal position sensor (if faulty)
  • •Fuel filter (if necessary)
  • •Spark plugs (if worn)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts necessary for the repair.
  • Disconnect the battery to ensure safety during inspection and repair.
2. Clean the Throttle Body
  • Remove the air intake duct connected to the throttle body.
  • Use throttle body cleaner and a clean rag to remove carbon deposits from the throttle body.
  • Ensure the throttle plate opens and closes smoothly.
  • Reconnect the air intake duct.
3. Inspect and Replace the Accelerator Pedal Position Sensor (if faulty)
  • Locate the accelerator pedal position sensor, typically mounted on the pedal assembly.
  • Disconnect the electrical connector from the sensor.
  • Remove the screws or bolts securing the sensor and replace it with a new one if it shows faulty readings.
  • Reconnect the electrical connector.
4. Check and Replace Fuel Filter (if necessary)
  • Locate the fuel filter in the fuel delivery system.
  • Relieve fuel system pressure by removing the fuel pump fuse and starting the engine until it stalls.
  • Disconnect the fuel lines from the filter and replace the filter with a new one.
  • Reconnect the fuel lines and ensure there are no leaks.
5. Verify Ignition Components
  • Remove the spark plugs and inspect for wear or carbon buildup.
  • Replace worn spark plugs with new ones, ensuring they are gapped correctly.
  • Test the ignition coils for proper resistance and replace if necessary.