my Honda Accord jerks when shifting from park to drive what should I do

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

510 words

Problem Statement

Learn how to diagnose and fix transmission jerking when shifting from park to drive in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before performing any work on the transmission.

Symptoms

•Jerking or lurching motion during the shift from park to drive
•Delayed engagement of the transmission
•Unusual noises during shifting (e.g., clunking sounds)
•Check engine light illuminated (possibly)
•Increased RPMs before shifting occurs

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for transmission-related codes.
2
Inspect transmission fluid level and condition; look for signs of contamination or burning.
3
Check the transmission linkage for proper adjustment and any signs of wear or damage.
4
Inspect engine mounts for wear or damage, which could cause excessive movement during shifting.
5
Test drive the vehicle to replicate the issue while monitoring engine and transmission performance.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Transmission fluid pump

Parts Required

•Transmission fluid (as specified in the owner's manual)
•Engine mounts (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to check for transmission-related codes.
2
Inspect transmission fluid level and condition; look for signs of contamination or burning.
3
Check the transmission linkage for proper adjustment and any signs of wear or damage.
4
Inspect engine mounts for wear or damage, which could cause excessive movement during shifting.
5
Test drive the vehicle to replicate the issue while monitoring engine and transmission performance.

Solution

1. Preparation

Gather tools and parts required for the repair.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to ensure safety during the work.

2. Check and Replace Transmission Fluid

Fluid Inspection:
1. Remove the transmission dipstick and wipe it clean.
2. Reinsert the dipstick and remove it again to check the fluid level and condition.
Fluid Replacement:
1. If fluid is low, add the appropriate type of transmission fluid (check owner's manual for specifications).
2. If fluid is contaminated or burnt, drain the old fluid using a transmission fluid pump.
3. Replace it with new transmission fluid, making sure to fill to the recommended level.

3. Inspect and Adjust Transmission Linkage

1. Locate the transmission linkage under the vehicle.
1. Visually inspect for any signs of wear or damage.
1. If necessary, adjust the linkage to ensure proper engagement. Follow the manufacturer's specifications for adjustments.

4. Inspect Engine Mounts

1. Visually inspect the engine mounts for cracks, wear, or separation.
1. If damaged, remove the mounting bolts and replace the engine mounts with new ones, ensuring they are properly torqued to manufacturer specifications.

5. Reconnect Battery and Test

Reconnect the battery terminals securely.
Start the vehicle and test by shifting from park to drive to verify if the issue persists.