my Honda Accord makes a loud noise when I accelerate, what could it be?

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

506 words

Problem Statement

Learn how to diagnose and fix loud noise during acceleration in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Exhaust System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Allow the engine to cool before working on any components.
•Use proper safety equipment and ensure the vehicle is securely supported before performing repairs.

Symptoms

•Loud noise that increases with acceleration
•Possible vibrations felt through the steering wheel
•Decreased power or responsiveness during acceleration
•Check engine light may be illuminated
•Unusual smells (burning or fuel-related)

Diagnostic Steps

1
Inspect the exhaust system for any leaks or damage.
2
Check the engine mounts for wear or failure.
3
Examine the drive belt and pulleys for wear or misalignment.
4
Scan for error codes using an OBD-II scanner.
5
Listen for the noise's source with the hood open while an assistant accelerates the vehicle.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Jack stands
•Safety gloves
•OBD-II scanner
•Torque wrench
•Mechanic’s stethoscope or long screwdriver
•Belt tension gauge (if necessary)

Parts Required

•Engine mounts (if damaged)
•Drive belt (if worn)
•Exhaust clamps or sections (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface and secure it with wheel chocks.
Gather tools: socket set, jack stands, and safety gloves.

2. Inspect Exhaust System

Sub-steps:
- Locate the exhaust components under the vehicle.
- Visually inspect for rust, holes, or loose connections.
- Use a soapy water solution to check for leaks; bubbles will indicate escaping air.
Tools Required: None specific beyond standard safety gear.

3. Check Engine Mounts

Sub-steps:
- Use a jack to slightly lift the engine (ensure safety supports are in place).
- Inspect the engine mounts for cracks, separation, or excessive wear.
- Replace any damaged mounts with new ones, ensuring correct torque specifications are followed (refer to service manual for torque values).
Tools Required: Socket set, torque wrench.

4. Examine Drive Belt and Pulleys

Sub-steps:
- Visually inspect the drive belt for fraying or cracks.
- Check the alignment of the pulleys and the tension on the belt.
- Replace the belt if it shows signs of wear and ensure proper tension upon installation.
Tools Required: Socket set, belt tension gauge (if necessary).

5. Address Engine Noise Source

Sub-steps:
- With the engine running and the hood open, use a mechanic’s stethoscope or a long screwdriver to pinpoint the noise's origin.
- If the noise is from the internal engine components, further inspection or professional diagnosis may be required.
Tools Required: Mechanic’s stethoscope or long screwdriver.