FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Accord's brake pedal goes to the floor, what does this mean - Honda Accord
Home/Cars/Honda/Accord/9th Generation (2013-2017)/my Honda Accord's brake pedal goes to the floor, what does this mean

my Honda Accord's brake pedal goes to the floor, what does this mean

Honda Accord 9th Generation (2013-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
critical
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
552 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake pedal issues in Honda Accord. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always allow the vehicle to cool before working on the brakes.
  • •Ensure the vehicle is securely lifted and supported before beginning work.

Symptoms

  • •Brake warning light illuminated on the dashboard
  • •Soft or spongy brake pedal feel
  • •Increased stopping distance
  • •Brake fluid leak under the vehicle
  • •Unusual noise when pressing the brake pedal

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Brake fluid
  • •Socket set
  • •Brake line wrench
  • •Container for old brake fluid
  • •Bleeding kit

Parts Required

  • •Brake master cylinder (if faulty)
  • •Brake lines or hoses (if damaged)

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
critical
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: Brake fluid, socket set, brake line wrench, container for old brake fluid, and a bleeding kit.
  • Ensure the vehicle is on a flat surface and securely lifted with jack stands.
  • Wear safety glasses and gloves.
2. Check and Refill Brake Fluid
  • Locate the brake fluid reservoir under the hood.
  • Remove the cap and check the fluid level. If low, add the appropriate brake fluid type (typically DOT 3 or DOT 4).
  • Inspect for any signs of contamination or debris in the fluid.
3. Inspect and Replace Brake Components

  • Inspect Master Cylinder:

    • Disconnect the brake lines from the master cylinder using a brake line wrench.
    • Remove the master cylinder mounting bolts and lift it out.
    • Inspect for internal leaks or damage. Replace if necessary.

  • Inspect Brake Lines and Hoses:

    • Examine all brake lines for corrosion or leaks. Replace any damaged sections.
    • Check rubber hoses for signs of cracking or swelling; replace if needed.
4. Bleed the Brake System
  • Begin at the wheel farthest from the master cylinder (typically the right rear).
  • Attach a bleeding kit to the brake bleeder valve on the caliper.
  • Have an assistant pump the brake pedal several times and hold it down.
  • Open the bleeder valve to allow brake fluid to escape, then close it before the pedal is released.
  • Repeat this process until no air bubbles are visible in the fluid.
  • Move to the next wheel and repeat until all are bled (right rear, left rear, right front, left front).