what causes my Honda Accord to shake when I drive over 60 mph

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

459 words

Problem Statement

Learn how to diagnose and fix shaking issues in Honda Accord when driving over 60 mph. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Ensure the vehicle is on a flat surface when inspecting tires and suspension.

Symptoms

•Vibration felt through the steering wheel
•Shaking of the entire vehicle
•Uneven tire wear
•Steering wheel pulling to one side
•Increased road noise at high speeds

Diagnostic Steps

1
Inspect tire condition for uneven wear or damage.
2
Check tire pressure to ensure it meets manufacturer specifications.
3
Perform a visual inspection of suspension components for wear or damage.
4
Balance all four tires and check for any bent rims.
5
Conduct a wheel alignment check to ensure proper angles.
6
Test drive the vehicle to replicate the shaking issue.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Inflation pump
•Socket set
•Torque wrench
•Wrench set
•Jack stands
•Alignment machine

Parts Required

•New tires (if damaged or excessively worn)
•Suspension components (if any are found to be worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition for uneven wear or damage.
2
Check tire pressure to ensure it meets manufacturer specifications.
3
Perform a visual inspection of suspension components for wear or damage.
4
Balance all four tires and check for any bent rims.
5
Conduct a wheel alignment check to ensure proper angles.
6
Test drive the vehicle to replicate the shaking issue.

Solution

1. Preparation

Gather tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Ensure safety gear is worn (gloves, safety glasses).

2. Tire Inspection

Sub-steps:
1. Remove the wheel covers if applicable.
2. Inspect each tire for uneven wear, bulges, or cracks.
3. Measure tire pressure using a gauge and inflate to recommended PSI.
Tools Required: Tire pressure gauge, inflation pump.

3. Wheel Balancing

Sub-steps:
1. Remove the wheels from the vehicle using a socket set.
2. Take the wheels to a tire shop for balancing.
3. Reinstall the wheels and torque to specification (typically 80-100 ft-lbs).
Tools Required: Socket set, torque wrench.

4. Suspension Inspection

Sub-steps:
1. Visually inspect shock absorbers for leaks or damage.
2. Check control arms and bushings for wear.
3. Replace any worn or damaged suspension components.
Tools Required: Wrench set, jack stands.

5. Wheel Alignment

Sub-steps:
1. Take the vehicle to a professional alignment shop.
2. Adjust the alignment angles to the manufacturer's specifications.
Tools Required: Alignment machine (typically handled at a shop).