why does my Honda Accord have condensation inside the car

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

507 words

Problem Statement

Learn how to diagnose and fix condensation issues inside your Honda Accord. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

HVAC

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is turned off and keys are removed before starting any work.

Symptoms

•Moisture on windows and interior surfaces
•Foggy windows, especially during cold weather
•Musty odor inside the cabin
•Water pooling in footwells or under mats
•Excessive humidity in the air inside the vehicle

Diagnostic Steps

1
Inspect the cabin air filter for debris and blockage.
2
Check the weather stripping around doors and windows for damage or poor sealing.
3
Examine the windshield for any cracks or gaps that could allow water intrusion.
4
Inspect the drainage channels and sunroof drains for clogs or blockages.
5
Use an OBD-II scanner to check for any HVAC-related fault codes.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver
•Socket set
•Vacuum
•Towels

Parts Required

•Cabin air filter
•Weather stripping (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the cabin air filter for debris and blockage.
2
Check the weather stripping around doors and windows for damage or poor sealing.
3
Examine the windshield for any cracks or gaps that could allow water intrusion.
4
Inspect the drainage channels and sunroof drains for clogs or blockages.
5
Use an OBD-II scanner to check for any HVAC-related fault codes.

Solution

1. Preparation

Gather tools: flathead screwdriver, socket set, vacuum, and towels.
Ensure the vehicle is parked on a level surface and is turned off before starting.

2. Inspect and Replace Cabin Air Filter

Locate the cabin air filter compartment (usually behind the glove box).
Remove the glove box to access the filter:
- Unscrew any screws holding the glove box in place.
- Release the stops to allow the glove box to drop down.
Remove the old cabin air filter and clean the area with a vacuum.
Install a new cabin air filter, ensuring it's oriented correctly, and reassemble the glove box.

3. Check and Replace Weather Stripping

Visually inspect the weather stripping around the doors and windows.
If damaged, carefully peel off the old weather stripping and clean the surface.
Measure and cut new weather stripping to fit and press it firmly in place.

4. Inspect Windshield and Seals

Look for cracks or gaps in the windshield. If found, consider resealing or replacing the windshield.
Check the bonding seal around the windshield for deterioration.
If the seal is damaged, consult a professional for repair.

5. Clean Drainage Channels

Locate drainage channels under the windshield and sunroof (if equipped).
Use a flexible wire or a vacuum to clear any debris or blockage.
Pour water into the channels to ensure proper drainage.