why does my Honda Accord shake when I brake

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

467 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Discover why your Honda Accord shakes when braking and learn how to fix it. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses when working on brake components.
•Ensure the vehicle is securely supported before working underneath it.

Symptoms

•Steering wheel vibrates during braking
•Pulsation felt in the brake pedal
•Vehicle pulls to one side when braking
•Increased stopping distance
•Noise coming from the brakes (squeaking or grinding)

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear.
2
Check brake pads for thickness and even wear.
3
Examine suspension components (tie rods, control arms) for wear or damage.
4
Assess tire condition and balance.
5
Scan for any error codes related to the ABS system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Brake cleaner
•Bungee cord (for caliper support)

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.

2. Raise the Vehicle

Use a jack to lift the vehicle and secure it with jack stands.
Remove the wheels to access the brake components.

3. Inspect and Replace Brake Rotors

Inspect Rotors: Check for warping using a dial indicator or straightedge.
Replace Rotors (if warped):
- Remove caliper bolts and detach the caliper from the rotor.
- Secure caliper with a bungee cord to avoid straining the brake line.
- Remove the old rotor by unscrewing the retaining screws (if applicable).
- Install the new rotor and torque retaining screws to manufacturer specifications (typically 10-15 lb-ft).

4. Inspect and Replace Brake Pads

Inspect Brake Pads: Ensure pads have sufficient material and are evenly worn.
Replace Pads (if necessary):
- Remove the caliper bracket bolts and take off the caliper.
- Remove old pads from the caliper bracket.
- Install new pads, ensuring they are oriented correctly.
- Reattach the caliper and torque bolts to manufacturer specifications (typically 20-25 lb-ft).

5. Reassemble and Lower Vehicle

Reinstall the wheels and torque lug nuts to manufacturer specifications (typically 80-100 lb-ft).
Lower the vehicle from the jack stands.