why is my Honda Accord shaking when I accelerate

Honda Accord 9th Generation (2013-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

479 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted and supported before working underneath.

Symptoms

•Shaking or vibration felt through the steering wheel or chassis
•Increased noise from the engine or drivetrain
•Possible loss of power during acceleration
•Uneven tire wear
•Steering wheel misalignment or pulling to one side

Diagnostic Steps

1
Inspect tire condition and pressure; check for flat spots or damage.
2
Perform a road test to identify the speed range at which shaking occurs.
3
Check for engine misfires using an OBD-II scanner for any error codes.
4
Inspect suspension components for wear or damage, including control arms and bushings.
5
Examine drivetrain components, including the driveshaft and CV joints, for any signs of wear.
6
Check wheel alignment and balance; ensure all wheels are properly balanced.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Torque wrench
•OBD-II scanner
•Tire pressure gauge

Parts Required

•Replacement tires (if necessary)
•Suspension components (if worn/damaged)
•Wheel balancing weights (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition and pressure; check for flat spots or damage.
2
Perform a road test to identify the speed range at which shaking occurs.
3
Check for engine misfires using an OBD-II scanner for any error codes.
4
Inspect suspension components for wear or damage, including control arms and bushings.
5
Examine drivetrain components, including the driveshaft and CV joints, for any signs of wear.
6
Check wheel alignment and balance; ensure all wheels are properly balanced.

Solution

1. Preparation

Tools Required: Jack and jack stands, lug wrench, torque wrench, OBD-II scanner, tire pressure gauge.
Ensure the vehicle is parked on a level surface and the engine is turned off.

2. Tire Inspection

Sub-steps:
1. Remove the wheel covers or hubcaps if applicable.
2. Use the tire pressure gauge to check and adjust tire pressures to manufacturer specifications.
3. Visually inspect tires for uneven wear, bulges, or other damage.
4. If tires are damaged, replace them with new tires.

3. Suspension and Drivetrain Inspection

Sub-steps:
1. Lift the vehicle using a jack and secure with jack stands.
2. Inspect the suspension components (control arms, bushings, struts) for any signs of wear or damage.
3. Check the driveshaft and CV joints for play or damage.
4. Replace any worn or damaged components as necessary.

4. Wheel Balancing and Alignment

Sub-steps:
1. Remove the wheels and take them to a tire shop for balancing if necessary.
2. After balancing, re-install the wheels and torque to manufacturer specifications.
3. Have a professional perform a wheel alignment if the steering wheel is misaligned.