how to fix P0705 code in Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0705

3 min read

498 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0705 code related to the Transmission Range Sensor in Honda Civic 10th Generation (2016-2021). Step-by-step guide included.

Error Code

P0705

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before checking or adding transmission fluid.

Symptoms

•Check engine light illuminated
•Transmission may not shift correctly
•Erratic or harsh shifting behavior
•Vehicle may not start in Park or Neutral
•Inability to engage the transmission properly

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner to confirm the P0705 code and check for any related codes.
2
Inspect the Transmission Range Sensor wiring harness for any visible damage or loose connections.
3
Check the Transmission Range Sensor voltage and ground using a multimeter.
4
Inspect the transmission fluid level and condition; low or contaminated fluid can affect sensor operation.
5
Clear the codes and take the vehicle for a test drive to see if the P0705 code returns.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Screwdrivers

Parts Required

•New Transmission Range Sensor
•Transmission fluid (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle using an OBD-II scanner to confirm the P0705 code and check for any related codes.
2
Inspect the Transmission Range Sensor wiring harness for any visible damage or loose connections.
3
Check the Transmission Range Sensor voltage and ground using a multimeter.
4
Inspect the transmission fluid level and condition; low or contaminated fluid can affect sensor operation.
5
Clear the codes and take the vehicle for a test drive to see if the P0705 code returns.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery to prevent any electrical shorts.

2. Inspect and Clean Connections

Reconnect the battery and locate the Transmission Range Sensor.
Disconnect the electrical connector from the sensor.
Inspect the connector for corrosion or debris; clean if necessary.
Check the wiring for any signs of wear or damage.

3. Replace the Transmission Range Sensor

Tools Required: Socket set, torque wrench, screwdrivers.
Parts Required: New Transmission Range Sensor.
Remove the mounting bolts securing the sensor using a socket.
Carefully pull the old sensor from its mounting location.
Install the new sensor by positioning it correctly and securing it with the mounting bolts; torque to manufacturer specifications.
Reconnect the electrical connector firmly.

4. Check and Refill Transmission Fluid

Remove the transmission fluid dipstick or plug.
Inspect the fluid condition; if dark or burnt, consider a fluid change.
If necessary, add the recommended type of transmission fluid to the correct level.

5. Final Steps

Reconnect the battery.
Start the engine and allow it to idle.
Check for leaks around the sensor area and ensure proper operation.