how to fix the transmission jerking in my Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes

3-5 hours

Time

medium

Difficulty

high

Severity

3 min read

581 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a level surface and securely supported before working underneath.
•Disconnect the battery before working on electrical components.
•Allow the engine and transmission to cool before opening any components.

Symptoms

•Jerking or shuddering during acceleration
•Delayed or harsh shifting between gears
•Unusual noises during gear changes
•Check engine light illuminated
•Increased RPM with no acceleration (slipping)

Diagnostic Steps

1
Scan the vehicle's computer using an OBD-II scanner to check for any stored error codes related to the transmission.
2
Inspect the transmission fluid level and condition; look for discoloration or a burnt smell.
3
Check for any visible leaks around the transmission area.
4
Test the transmission fluid pressure using a gauge to ensure it meets specifications.
5
Inspect the transmission control module (TCM) connections for corrosion or damage.
6
Perform a road test to replicate the jerking and note the specific conditions under which it occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Transmission fluid gauge
•Fluid pump

Parts Required

•Transmission fluid (specific to Honda)
•Transmission filter (if applicable)
•New seals or gaskets (if leaks are present)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's computer using an OBD-II scanner to check for any stored error codes related to the transmission.
2
Inspect the transmission fluid level and condition; look for discoloration or a burnt smell.
3
Check for any visible leaks around the transmission area.
4
Test the transmission fluid pressure using a gauge to ensure it meets specifications.
5
Inspect the transmission control module (TCM) connections for corrosion or damage.
6
Perform a road test to replicate the jerking and note the specific conditions under which it occurs.

Solution

1. Preparation

Gather tools and safety equipment.
Tools Required: OBD-II scanner, socket set, torque wrench, transmission fluid gauge, fluid pump.
Parts Required: Transmission fluid (specific to Honda), transmission filter (if applicable), new seals or gaskets (if leaks are present).
Safety Warnings: Ensure the vehicle is on a level surface and securely supported before working underneath.

2. Transmission Fluid Change

Drain Old Fluid
- Locate the transmission drain plug and remove it using a socket wrench.
- Allow the fluid to fully drain into a suitable container.
Replace Filter (if applicable)
- Remove the transmission pan by loosening the bolts carefully.
- Replace the old filter with a new one, ensuring the new filter is seated properly.
Install Pan and New Gasket
- Clean the transmission pan and the mating surface on the transmission.
- Install a new gasket on the pan and reattach it using the appropriate torque specifications (usually around 10-15 ft-lbs).
Refill Transmission Fluid
- Use a fluid pump to fill the transmission with new fluid through the dipstick tube or fill port.
- Check the owner's manual for the correct type and amount of fluid (usually around 3-4 quarts for a change).

3. Electrical System Check

Inspect TCM Connections
- Disconnect the battery before working on electrical components.
- Remove the TCM connector and inspect for corrosion, dirt, or pins that may be bent.
- Clean the connector pins and reconnect securely.
Replace Solenoids (if necessary)
- If error codes indicate solenoid issues, access the solenoids by removing the transmission pan again.
- Replace the faulty solenoids according to the manufacturer’s specifications.