how to reset my Honda Civic 10th Generation (2016-2021) check engine light

Honda Civic 10th Generation (2016-2021)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

374 words

Problem Statement

Learn how to reset the check engine light on your Honda Civic 10th Generation (2016-2021) after addressing underlying issues. Step-by-step guide included.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before beginning the reset process.

Symptoms

•Check engine light is illuminated on the dashboard
•Vehicle may exhibit no noticeable performance issues
•Error codes may be stored in the vehicle’s computer system
•Potential for other warning lights to appear if not addressed

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any underlying issues.
2
Address any issues indicated by the error codes before attempting to reset the check engine light.
3
Verify that all repairs are completed and no new issues are present.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vehicle owner's manual

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface with the engine off.
Gather tools: OBD-II scanner, vehicle owner's manual (for reference).

2. Using an OBD-II Scanner

Locate the OBD-II port under the dashboard on the driver's side.
Plug the OBD-II scanner into the port.
Turn the vehicle's ignition to the "ON" position without starting the engine.
Follow the scanner's prompts to read and clear error codes.

3. Resetting the Check Engine Light

After reading the codes, select the option to "Clear Codes" or "Reset Check Engine Light" on the OBD-II scanner.
Confirm the action when prompted on the scanner.
Disconnect the OBD-II scanner from the port.
Start the vehicle to ensure the check engine light is off.