how to reset the check engine light on Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

393 words

Problem Statement

Learn how to reset the check engine light on Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before starting the procedure
•Be cautious when working with the battery to prevent electrical shock

Symptoms

•Check engine light illuminated
•Potential diagnostic trouble codes (DTCs) stored in the vehicle's computer
•Possible engine performance issues if underlying problem not resolved

Diagnostic Steps

1
Scan for error codes using OBD-II scanner
2
Address any underlying issues indicated by the codes to ensure the check engine light will not come back on
3
Disconnect the vehicle's battery for a few minutes to reset the ECU memory as a method to clear the check engine light

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Wrench or socket set

Parts Required

•None (if only resetting the check engine light)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and equipment:
- OBD-II scanner
- Wrench or socket set (for battery disconnection)

2. Use OBD-II Scanner

Locate the OBD-II port under the dashboard, usually near the driver's side.
Plug in the OBD-II scanner and turn on the ignition without starting the engine.
Follow the scanner's prompts to read and clear the error codes. This will typically involve selecting "Erase Codes" or "Clear Codes" on the scanner interface.

3. Disconnect Battery (if necessary)

Use a wrench or socket set to loosen the negative terminal (black) on the battery.
Remove the negative terminal from the battery post and secure it away from the battery.
Wait for at least 10 minutes to allow the vehicle’s ECU to reset.
Reconnect the negative terminal and tighten it securely.