how to reset the check engine light on Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

352 words

Problem Statement

Learn how to reset the check engine light on Honda Civic 10th Generation (2016-2021) with this step-by-step guide. Ensure your vehicle runs smoothly.

Affected Component

Engine

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a secure location before working on it.

Symptoms

•Check engine light illuminated
•Error codes stored in the vehicle's computer
•Vehicle running normally post-repair
•No new symptoms related to engine performance

Diagnostic Steps

1
Ensure the vehicle is in a safe location, parked with the engine off.
2
Use an OBD-II scanner to check for any stored error codes.
3
Address any underlying issues if error codes are present.
4
Clear the error codes using the OBD-II scanner.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vehicle owner's manual

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and equipment.
Tools Required: OBD-II scanner, vehicle owner's manual (for reference).
Ensure the vehicle is turned off before starting.

2. Connect the OBD-II Scanner

Locate the OBD-II port under the dashboard near the driver's seat.
Plug the OBD-II scanner into the port.
Turn the vehicle's ignition to the "ON" position without starting the engine.

3. Read and Clear Codes

Follow the scanner's prompts to read the stored error codes.
If there are error codes, note them for future reference.
Select the option to clear or reset the codes.
Confirm the action when prompted by the scanner.

4. Disconnect the Scanner

Once the codes have been cleared, safely disconnect the scanner from the OBD-II port.
Turn the ignition off and then on again to check if the check engine light remains off.