how to reset the check engine light on Honda Civic 10th Generation (2016-2021)

Honda Civic 10th Generation (2016-2021)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

373 words

Problem Statement

Learn how to reset the check engine light on Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and tools required.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stable position before performing any diagnostics.

Symptoms

•Check engine light illuminated
•Potentially stored error codes in the vehicle's computer
•Possible recent repairs or maintenance performed

Diagnostic Steps

1
Scan the vehicle's OBD-II system using an OBD-II scanner to check for any stored error codes.
2
Note down any trouble codes and their definitions to ensure the underlying issue is resolved before resetting the light.
3
Clear the error codes using the OBD-II scanner, which should turn off the check engine light.
4
If the light comes back on, inspect the vehicle for issues that may have triggered the codes.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vehicle owner's manual

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system using an OBD-II scanner to check for any stored error codes.
2
Note down any trouble codes and their definitions to ensure the underlying issue is resolved before resetting the light.
3
Clear the error codes using the OBD-II scanner, which should turn off the check engine light.
4
If the light comes back on, inspect the vehicle for issues that may have triggered the codes.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner, vehicle owner's manual.
Ensure the vehicle is parked in a well-ventilated area with the engine off.

2. Connect OBD-II Scanner

Locate the OBD-II port under the driver's side dashboard.
Plug the OBD-II scanner into the port.
Turn the ignition key to the "ON" position without starting the engine.

3. Retrieve and Clear Codes

Using the scanner, select the "Read Codes" option to display any trouble codes.
After noting the codes, select the "Erase Codes" option to clear the codes and reset the check engine light.
Confirm the reset process on the scanner.

4. Verify Reset

Turn off the ignition and unplug the OBD-II scanner.
Start the engine and check if the check engine light is off.