how to reset the maintenance light on Honda Civic 11th Generation (2022-Present)

Honda Civic 10th Generation (2016-2021)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

360 words

Problem Statement

Learn how to reset the maintenance light on your 2022 Honda Civic 11th Generation. Step-by-step guide for quick and easy reset procedures.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' mode before starting the reset process.

Symptoms

•Maintenance light is illuminated on the dashboard
•Service indicator remains after completing scheduled maintenance
•No other warning lights illuminated

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the 'Home' button on the infotainment system.
3
Navigate to 'Settings' and select 'Vehicle.'
4
Choose 'Maintenance Information' from the menu.
5
Select 'Reset' for the maintenance item that needs to be cleared.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required, though an owner's manual may be helpful for reference.

Parts Required

•None required for this task.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked safely with the engine off.
Gather the necessary tools, if needed, such as the owner's manual for reference.

Turn the ignition to the "ON" position (but do not start the engine).
Press the "Home" button on the dashboard to access the infotainment system.
Using the touchscreen, navigate to "Settings."

3. Navigate to Vehicle Settings

In the "Settings" menu, select "Vehicle."
Scroll down to "Maintenance Information."

4. Reset the Maintenance Light

Select the maintenance item that you want to reset (e.g., oil change, tire rotation).
Press "Reset" to confirm the action.
A confirmation message should appear; select "OK" to finalize the reset.

5. Verify the Reset

Turn the ignition to the "OFF" position and then back to "ON" to ensure the maintenance light is no longer illuminated.