FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 10th Generation (2016-2021) has a check engine light and a rough idle - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/my Honda Civic 10th Generation (2016-2021) has a check engine light and a rough idle

my Honda Civic 10th Generation (2016-2021) has a check engine light and a rough idle

Honda Civic 10th Generation (2016-2021)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
488 words

Problem Statement

Learn how to diagnose and fix check engine light and rough idle issues in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before performing any repairs to avoid burns.

Symptoms

  • •Check engine light illuminated
  • •Rough idle at stop or low speeds
  • •Decreased acceleration response
  • •Poor fuel economy
  • •Engine stalling or hesitation during acceleration

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Fuel pressure gauge
  • •Spark plug socket

Parts Required

  • •Air filter
  • •Spark plugs
  • •Ignition coils (if faulty)
  • •Vacuum hoses (if damaged)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts before starting.
  • Disconnect the negative battery terminal to prevent electrical shorts.
2. Inspect and Replace Air Filter
  • Remove the air filter cover using a socket set.
  • Take out the old air filter and inspect for dirt and debris.
  • Replace it with a new air filter, ensuring it fits snugly in place.
  • Reattach the air filter cover and secure it.
3. Check and Replace Spark Plugs
  • Remove the engine cover if applicable using a socket set.
  • Disconnect the ignition coil connectors and unscrew the ignition coils from the cylinder head.
  • Remove the old spark plugs using a spark plug socket and inspect them for wear.
  • Install new spark plugs with the specified gap (0.044 inches for most Honda engines).
  • Reinstall the ignition coils and reconnect the connectors.
4. Inspect and Repair Vacuum Hoses
  • Visually inspect all vacuum hoses connected to the intake manifold.
  • Replace any cracked or disconnected hoses with new ones.
  • Ensure all connections are tight.
5. Clear DTC Codes
  • Use the OBD-II scanner to clear the diagnostic trouble codes (DTC) after making repairs.
  • Reconnect the negative battery terminal.