FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 10th Generation (2016-2021) has a rough idle when stopped what could cause it - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/my Honda Civic 10th Generation (2016-2021) has a rough idle when stopped what could cause it

my Honda Civic 10th Generation (2016-2021) has a rough idle when stopped what could cause it

Honda Civic 10th Generation (2016-2021)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
524 words

Problem Statement

Learn how to diagnose and fix rough idle issues in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Allow the engine to cool before inspecting or working on the intake system.

Symptoms

  • •Rough engine idle at stoplights or when stationary
  • •Engine stalling intermittently
  • •Increased engine vibrations felt in the cabin
  • •Poor fuel economy
  • •Check engine light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Fuel pressure gauge
  • •Throttle body cleaner
  • •Torque wrench

Parts Required

  • •Engine air filter
  • •Spark plugs
  • •Vacuum hoses (if damaged)
  • •Idle air control valve (if faulty)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the repair.
  • Disconnect the negative battery terminal to ensure safety during repairs.
2. Inspect and Replace Air Filter
  • Remove the air intake duct by loosening the clamps using a socket set.
  • Take out the air filter and inspect it for dirt and blockages.
  • Replace the air filter with a new one (ensure it meets OEM specifications).
  • Reassemble the air intake duct and tighten the clamps.
3. Check and Clean the Idle Air Control Valve (IACV)
  • Locate the IACV on the throttle body.
  • Remove the electrical connector and the mounting screws using a socket set.
  • Take the IACV off and clean it with throttle body cleaner, ensuring that all carbon deposits are removed.
  • Reinstall the IACV and reconnect the electrical connector.
4. Inspect and Replace Ignition Components
  • Remove the engine cover if applicable.
  • Disconnect the spark plug wires from the ignition coils.
  • Remove the ignition coils and spark plugs using a socket set.
  • Inspect the spark plugs for wear. Replace with new ones if necessary (ensure correct gap and specifications).
  • Reinstall the ignition coils and reconnect the spark plug wires.
5. Check for Vacuum Leaks
  • Inspect all vacuum hoses for cracks or disconnections.
  • Replace any damaged hoses with new ones.
  • Use a smoke machine or carburetor cleaner to identify any hidden leaks during engine operation.