my Honda Civic 10th Generation (2016-2021) has a vibration when braking what's causing it

Honda Civic 10th Generation (2016-2021)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

560 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix vibration when braking in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses and gloves when working on the vehicle.
•Ensure the vehicle is securely lifted and supported before working underneath.

Symptoms

•Vibration felt through the brake pedal
•Steering wheel shakes during braking
•Unusual noise when braking (grinding or squeaking)
•Increased stopping distance
•Brake pedal pulsation

Diagnostic Steps

1
Inspect brake pads for wear and unevenness.
2
Check brake rotors for warping or surface damage.
3
Examine wheel alignment and tire condition.
4
Inspect suspension components for wear or damage (e.g., control arms, bushings).
5
Test for any loose or damaged components in the braking system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Torque wrench
•Brake caliper tool
•Rotor gauge

Parts Required

•Brake pads
•Brake rotors (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: Jack, jack stands, lug wrench, torque wrench, brake caliper tool, and a rotor gauge.
Lift the vehicle using the jack and secure it with jack stands.
Remove the wheel using the lug wrench to access the braking components.

2. Inspect Brake Pads and Rotors

Sub-steps:
1. Remove the brake caliper by unscrewing the caliper bolts using the appropriate socket.
2. Slide the caliper off the rotor and support it hanging with a bungee cord (do not let it dangle by the brake line).
3. Remove the brake pads from the caliper bracket and inspect for wear. Replace if they are below the manufacturer's specifications.
4. Measure the thickness of the rotors using a rotor gauge. Replace if they are below the minimum thickness or if warped.

3. Replace Brake Pads and Rotors (if necessary)

Sub-steps:
1. If replacing, install new rotors onto the hub, ensuring they are clean and free of oil.
2. Install new brake pads into the caliper bracket.
3. Compress the brake caliper piston using a brake caliper tool to fit over the new pads.
4. Reattach the caliper over the new pads and torque the caliper bolts to the manufacturer's specifications (typically 25-30 ft-lbs).

4. Check Wheel Alignment and Suspension

Sub-steps:
1. Inspect tires for uneven wear; rotate or replace as necessary.
2. Check the alignment by measuring the angles of the front wheels; adjust if out of specifications.
3. Inspect suspension components for wear, and replace any damaged parts as necessary.

5. Reassemble and Test Drive

Sub-steps:
1. Reinstall the wheel and torque the lug nuts to the manufacturer's specifications (typically 80-100 ft-lbs).
2. Lower the vehicle from the jack stands and test drive to ensure the vibration has been resolved.