FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 10th Generation (2016-2021) makes a grinding noise when braking what's the issue - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/my Honda Civic 10th Generation (2016-2021) makes a grinding noise when braking what's the issue

my Honda Civic 10th Generation (2016-2021) makes a grinding noise when braking what's the issue

Honda Civic 10th Generation (2016-2021)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
563 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding noise when braking in Honda Civic 10th Generation (2016-2021). Step-by-step guide with symptoms and solutions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always engage the parking brake before working on the vehicle.
  • •Allow the brakes to cool before inspecting or working on them.

Symptoms

  • •Grinding noise when applying brakes
  • •Vibration or pulsation in the brake pedal
  • •Decreased braking efficiency
  • •Warning light for brake system illuminated
  • •Uneven wear on brake pads or rotors

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Lug wrench
  • •Jack and jack stands
  • •Socket set
  • •Torque wrench
  • •Brake grease
  • •OBD-II scanner

Parts Required

  • •Brake pads
  • •Brake rotors

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the parking brake is engaged.
  • Disconnect the negative battery terminal to ensure safety while working on the braking system.
2. Remove Wheel
  • Use a lug wrench to loosen the wheel lug nuts.
  • Lift the vehicle using a jack and secure it with jack stands.
  • Remove the lug nuts completely and take off the wheel.
3. Inspect and Replace Brake Pads

  • Inspect Brake Pads:

    • Remove the caliper bolts using a socket set.
    • Slide the caliper off the rotor and support it using a bungee cord to avoid stress on the brake line.
    • Check the brake pads for thickness. If they are worn down to 3mm or less, replace them.

  • Replace Brake Pads:

    • Remove the old brake pads from the caliper bracket.
    • Install new brake pads in the caliper bracket, ensuring they are correctly aligned.
    • Use brake grease on the backing of the pads to reduce noise.
4. Inspect and Replace Brake Rotors

  • Inspect Brake Rotors:

    • Check the rotor surface for grooves or scoring.
    • Measure rotor thickness with a micrometer to ensure it meets manufacturer specifications.

  • Replace Brake Rotors:

    • Remove the caliper bracket by unbolting it.
    • Slide the rotor off the hub. If it’s stuck, tap it gently with a rubber mallet.
    • Install the new rotor in the reverse order of removal, ensuring it is seated properly.
5. Reassemble and Check
  • Reattach the caliper bracket and torque the bolts to the manufacturer's specifications (typically around 25-30 lb-ft).
  • Reinstall the wheel and torque the lug nuts in a crisscross pattern.
  • Reconnect the negative battery terminal.