my Honda Civic 10th Generation (2016-2021) shakes when I accelerate what's wrong

Honda Civic 10th Generation (2016-2021)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

467 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Allow the engine to cool down before performing any inspections related to the drivetrain.

Symptoms

•Vehicle shakes or vibrates during acceleration
•Steering wheel vibrates noticeably
•Increased noise from the engine or drivetrain
•Unusual tire wear patterns
•Potential loss of power during acceleration

Diagnostic Steps

1
Inspect tire pressure and condition, checking for uneven wear or damage.
2
Perform a visual inspection of the suspension components for wear or damage.
3
Check for any error codes using an OBD-II scanner.
4
Spin balance the tires to ensure they are properly balanced.
5
Test drive the vehicle to determine if the shaking occurs at specific speeds or under certain conditions.
6
Inspect the driveshaft and axles for any visible damage or wear.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Tire pressure gauge
•OBD-II scanner
•Torque wrench
•Basic hand tools
•Socket set

Parts Required

•Replacement tires (if damaged)
•Suspension components (if worn)
•Driveshaft or axles (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire pressure and condition, checking for uneven wear or damage.
2
Perform a visual inspection of the suspension components for wear or damage.
3
Check for any error codes using an OBD-II scanner.
4
Spin balance the tires to ensure they are properly balanced.
5
Test drive the vehicle to determine if the shaking occurs at specific speeds or under certain conditions.
6
Inspect the driveshaft and axles for any visible damage or wear.

Solution

1. Preparation

Gather tools: jack, jack stands, tire pressure gauge, OBD-II scanner, torque wrench, and basic hand tools.
Park the vehicle on a level surface and engage the parking brake.

2. Tire Inspection and Balancing

Tire Pressure Check:
- Use a tire pressure gauge to measure each tire's pressure.
- Inflate or deflate tires to the manufacturer's recommended pressure.
Tire Condition Assessment:
- Inspect each tire for bulges, cracks, or uneven wear.
- Replace any damaged tires as necessary.
Tire Balancing:
- Remove the wheels using a socket set.
- Take tires to a tire shop to have them balanced.
- Reinstall tires, ensuring to torque lug nuts to the manufacturer’s specifications (typically 80-100 ft-lbs).

3. Suspension Component Inspection

Visual Inspection:
- Check for worn or damaged control arms, bushings, and struts.
- Replace any damaged components as necessary.

4. Driveshaft and Axle Inspection

Drivetrain Inspection:
- Inspect the driveshaft for any signs of wear or damage.
- Check CV joints for any play or damage.
- Replace any damaged joints or axles as necessary.