FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Civic 10th Generation (2016-2021) won't go into gear what could be the problem - Honda Civic
Home/Cars/Honda/Civic/10th Generation (2016-2021)/my Honda Civic 10th Generation (2016-2021) won't go into gear what could be the problem

my Honda Civic 10th Generation (2016-2021) won't go into gear what could be the problem

Honda Civic 10th Generation (2016-2021)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
542 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Diagnose and fix transmission issues in Honda Civic 10th Generation (2016-2021) with our step-by-step guide. Learn about symptoms, tools, and solutions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the vehicle to cool before checking or adding transmission fluid.

Symptoms

  • •Inability to shift from park to drive or reverse
  • •Grinding or clunking noise when attempting to shift gears
  • •Illuminated check engine light or transmission warning light
  • •Fluid leaks under the vehicle
  • •Difficulty in engaging the clutch (for manual transmissions)
  • •Unresponsive accelerator pedal while in gear

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Wrench set

Parts Required

  • •Transmission fluid
  • •Clutch master/slave cylinder (if applicable)
  • •Brake switch (if faulty)

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools such as a socket set, OBD-II scanner, and transmission fluid.
  • Ensure the vehicle is on a level surface and secured with wheel chocks.
  • Disconnect the negative battery terminal to prevent electrical shorts.
2. Check Transmission Fluid
  • Locate the transmission dipstick (if applicable) and remove it.
  • Wipe it clean, reinsert it, and remove again to check the fluid level.
  • If low, add the recommended transmission fluid type (refer to owner's manual).
  • If the fluid is dark or has a burnt smell, consider a fluid change.
3. Inspect Clutch Components (Manual Transmission Only)
  • Locate the clutch master and slave cylinders.
  • Check for fluid leaks around these components.
  • If leaks are found, replace the faulty cylinder.
  • Bleed the clutch system to remove air bubbles.
4. Inspect Gear Selector and Linkage
  • Remove any covers obstructing access to the gear selector mechanism.
  • Check for any loose or damaged linkage connections.
  • Adjust or replace any misaligned components as necessary.
5. Test Brake Switch
  • Locate the brake switch near the brake pedal.
  • Use a multimeter to test for continuity when the brake pedal is pressed.
  • If the switch fails, replace it to ensure proper gear shifting functionality.
6. Reassemble and Test
  • Reattach any covers or components that were removed during inspection.
  • Reconnect the negative battery terminal.
  • Start the vehicle and test the shifting operation.