why does my Honda Civic 10th Generation (2016-2021) make a grinding noise when braking

Honda Civic 10th Generation (2016-2021)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

521 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding noise when braking in Honda Civic 10th Generation (2016-2021). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported on jack stands before working underneath.
•Allow brake components to cool before handling to avoid burns.

Symptoms

•Grinding noise occurs when applying brakes.
•Reduced braking efficiency or responsiveness.
•Vibration felt through the brake pedal.
•Brake warning light illuminated on the dashboard.
•Increased brake dust accumulation on wheels.

Diagnostic Steps

1
Inspect brake pads for wear; measure remaining thickness.
2
Check brake rotors for scoring or damage.
3
Examine calipers for proper functionality and alignment.
4
Inspect brake hardware for rust or corrosion.
5
Test brake fluid level and condition.
6
Scan for any error codes related to the braking system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Brake cleaner
•Torque wrench
•Socket set

Parts Required

•Brake pads
•Brake rotors (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: Jack and jack stands, lug wrench, brake cleaner, torque wrench, socket set.
Ensure the vehicle is parked on a flat surface and engage the parking brake.
Disconnect the battery if working on any electrical components.

2. Remove Wheel

Use the lug wrench to loosen the lug nuts on the wheel.
Lift the vehicle using the jack and secure with jack stands.
Remove the wheel to access the brake components.

3. Inspect and Replace Brake Pads

Check the brake pads' thickness; if less than 3mm, replace.
Remove caliper bolts using a socket set and slide the caliper off.
Remove old brake pads from the bracket.
Sub-step: Apply brake grease on the backing of new pads to prevent noise.
Install new brake pads into the caliper bracket.

4. Inspect and Replace Rotors

Check the rotors for any scoring or excessive wear.
If damaged, remove the rotor by removing the retaining screws or caliper bracket.
Install new rotors, ensuring they are properly seated and secured.
Sub-step: Torque the rotor screws to the manufacturer's specifications.

5. Reassemble Braking Components

Reinstall the caliper over the new brake pads.
Tighten caliper bolts to the manufacturer's torque specifications.
Reinstall the wheel and hand-tighten the lug nuts.

6. Lower Vehicle and Check Brake Fluid

Lower the vehicle off the jack stands.
Tighten lug nuts in a criss-cross pattern to ensure even pressure.
Check brake fluid level and top off if necessary.